Every SU carburettor meters fuel through the annular gap between a fixed-bore jet and a tapered metering needle mounted in the vacuum piston. Knowing the exact diameter profile of a needle across its length allows you to compare richer or leaner alternatives without guessing from part numbers.
Downloadable 623-profile SU needle database
The complete 623-needle dataset compiled from legacy SU needle tables (NEEDLES090.txt for 0.090 in jets: 354 profiles; and NEEDLES100.txt for 0.100 in jets: 269 profiles) is hosted directly on Tuning Wiki:
Status of the link on sucarb.co.uk: SU Carburetters' own Needle Comparison Charts page links to an external RollApp spreadsheet (rollapp.com/rollmyfile/...) which currently returns HTTP 500, and the SU FAQ notes that the older Minty Lamb needle comparison site is offline. Burlen Ltd also publishes the printed SU Needle Profile Chart (ALT 9601) covering over 700 fixed and spring-loaded profiles across 0.090 in, 0.100 in, 0.125 in and 3/16 in jets.
How to read SU needle stations
- 16 stations at 1/8 in intervals: Station 1 is near the cylindrical base/shoulder or datum groove (idle position), and each successive station (2 through 16) steps
1/8 in(0.125 in/3.175 mm) closer to the tip (full piston lift / wide-open throttle). - Values in ten-thousandths of an inch (0.0001 in): For example,
890means0.0890 in, and990means0.0990 in. - Smaller number = richer mixture: Because the needle sits inside a fixed jet diameter, a smaller needle diameter at a given station leaves a larger annular fuel gap and flows more fuel.
- Match the jet diameter family: Never install a
0.090 inneedle (typically0.890/890at Station 1) into a0.100 injet (990at Station 1), or vice versa—the idle datum clearance will be completely wrong (SU HS troubleshooting guide). - 1–2 character vs 3-letter codes: Classic 1–2 character codes (such as
6,M,AA,H6) are typically rigid/fixed-mount needles, whereas 3-letter codes (such asAAA,AAU,ABD,BAA,BDQ) are spring-loaded ("biased" / swing) needles introduced on later emissions-era HS and HIF carburettors. - Note on SM and SN: Legacy tables record a known discrepancy in older printed charts for
SMandSN; both the legacy values and the corrected profiles (SM*andSN*) are retained in the PDF dataset.
Jet-size families
| Jet bore | Typical SU carburettors | Typical Station 1 diameter | Notes |
|---|---|---|---|
| 0.090 in | Most 1¼ in & 1½ in units (H2, HS2, HS4, HIF4, HIF38) | 890 (0.0890 in; some 880/900) | Common on Mini, Midget/Sprite, MGB 4-cyl, Morris Minor, Spitfire |
| 0.100 in | Most 1¾ in units (H6, HD6, HS6, HIF6, HIF44) | 990 (0.0990 in; some 1000) | Common on Triumph TR/2000/2500, Volvo B18/B20, Rover V8, Austin-Healey 3000, Metro 1.3 |
| 0.125 in | 2 in & 1⅞ in large-bore units (H8, HD8, HS8, HIF7) | 1250 shank | Uses U-series needles (e.g. UM, UO, UN, UR) where the groove sets the piston flush datum rather than a shoulder; check ALT 9601 for full 0.125 in station charts. |
Selected needle profile examples (0.0001 in)
Example profiles from the database (complete 623-row tables are in the PDF above):
| Jet | Needle | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.090 | AAA | 890 | 850 | 814 | 785 | 755 | 720 | 674 | 630 | 600 | 580 | 560 | 540 | 520 | 500 | 480 | 460 |
| 0.090 | AAB | 890 | 850 | 824 | 785 | 752 | 715 | 670 | 610 | 560 | 537 | 516 | 493 | 470 | 448 | 448 | 448 |
| 0.090 | AAU | 890 | 850 | 828 | 806 | 780 | 745 | 710 | 675 | 647 | 620 | 590 | 560 | 530 | 500 | 470 | 440 |
| 0.090 | ABD | 890 | 850 | 828 | 803 | 765 | 740 | 710 | 675 | 647 | 620 | 590 | 560 | 530 | 500 | 470 | 440 |
| 0.090 | ACD | 890 | 850 | 828 | 806 | 779 | 752 | 713 | 680 | 665 | 650 | 635 | 620 | 605 | 590 | 575 | 560 |
| 0.090 | H6 | 890 | 855 | 820 | 800 | 780 | 760 | 740 | 720 | 700 | 680 | 660 | 640 | — | — | — | — |
| 0.090 | M | 890 | 855 | 832 | 808 | 785 | 763 | 745 | 726 | 707 | 688 | 669 | 650 | — | — | — | — |
| 0.100 | BAA | 990 | 950 | 925 | 895 | 870 | 850 | 823 | 792 | 760 | 729 | 697 | 665 | 633 | 600 | 567 | 534 |
| 0.100 | BAW | 990 | 950 | 918 | 887 | 860 | 827 | 799 | 774 | 755 | 735 | 715 | 700 | 690 | 680 | 670 | 650 |
| 0.100 | BCE | 990 | 950 | 900 | 872 | 835 | 795 | 768 | 740 | 705 | 675 | 645 | 615 | 585 | 555 | 525 | 495 |
| 0.100 | BDQ | 990 | 960 | 932 | 905 | 883 | 863 | 847 | 831 | 818 | 805 | 790 | 770 | 750 | 730 | 710 | 690 |
| 0.100 | SM* | 990 | 950 | 915 | 885 | 855 | 825 | 795 | 765 | 735 | 710 | 690 | 670 | 650 | 630 | — | — |
| 0.100 | SN* | 990 | 950 | 915 | 890 | 865 | 845 | 835 | 820 | 800 | 780 | 765 | 750 | 740 | 730 | — | — |
Related pages
- SU carburettors: types, sizing and models
- Carburettors (section overview)
- Carburettor tuning, jetting and setup