Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Datalogging and telematics
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Race Technology

Industrial and vehicle-testing data logger with GPS, accelerometers, sensor inputs and SD data storage.

Race Technology DL2
Image: Race Technology, reproduced with permission; manufacturer source.

Specifications and capabilities

The manufacturer lists 5 Hz GPS, 12 analogue channels, four frequency inputs, CAN and serial interfaces, with higher-rate and other options available. Confirm fitted options and card compatibility. Manufacturer specifications and documentation.

Data analysis software

Load a recorded DL2 run into Race Technology Analysis to plot channels and review the results. The manufacturer’s loading guide covers local storage and connected devices. Manufacturer documentation.

Race Technology Analysis showing graphs, lap times, video and a track map
Race Technology Analysis example; the available channels and video depend on the recording and enabled options. Image: Race Technology, reproduced with permission; manufacturer source.

Download Race Technology software for Windows. Check the current version and any licence or hardware requirements; some advanced functions require a unit-linked licence. See the Race Technology software overview for features and licensing.

Pinouts and cabling

Front 9-way male serial connector:

Pin / terminalFunction
2RS232 RX
3RS232 TX
5Ground
7+V input/output

Front 9-way male CAN connector:

Pin / terminalFunction
2CAN low
3 and 6Ground
7CAN high
9+V input/output

On the 25-way analogue connector the manufacturer lists pins 1–8 for ADC 1–8, pins 9–12 for ADC 9–12 / outputs 1–4, and pins 14–25 as ground. Pin 13 is not assigned in the cited table; consult the source for all connectors and orientation.

Manufacturer connection reference.

Check the connector number, version and options on the actual unit against the manufacturer's documentation before wiring. Disconnect power before changing connections.

Wiring overview

Race Technology DL2 functional wiring overview
Functional wiring overview; not a connector-face diagram. Confirm actual connections with the manufacturer.

Return to the Race Technology manufacturer page.