Industrial and vehicle-testing data logger with GPS, accelerometers, sensor inputs and SD data storage.

Specifications and capabilities
The manufacturer lists 5 Hz GPS, 12 analogue channels, four frequency inputs, CAN and serial interfaces, with higher-rate and other options available. Confirm fitted options and card compatibility. Manufacturer specifications and documentation.
Data analysis software
Load a recorded DL2 run into Race Technology Analysis to plot channels and review the results. The manufacturer’s loading guide covers local storage and connected devices. Manufacturer documentation.

Download Race Technology software for Windows. Check the current version and any licence or hardware requirements; some advanced functions require a unit-linked licence. See the Race Technology software overview for features and licensing.
Pinouts and cabling
Front 9-way male serial connector:
| Pin / terminal | Function |
|---|---|
| 2 | RS232 RX |
| 3 | RS232 TX |
| 5 | Ground |
| 7 | +V input/output |
Front 9-way male CAN connector:
| Pin / terminal | Function |
|---|---|
| 2 | CAN low |
| 3 and 6 | Ground |
| 7 | CAN high |
| 9 | +V input/output |
On the 25-way analogue connector the manufacturer lists pins 1–8 for ADC 1–8, pins 9–12 for ADC 9–12 / outputs 1–4, and pins 14–25 as ground. Pin 13 is not assigned in the cited table; consult the source for all connectors and orientation.
Manufacturer connection reference.
Check the connector number, version and options on the actual unit against the manufacturer's documentation before wiring. Disconnect power before changing connections.
Wiring overview
Return to the Race Technology manufacturer page.