The DL1 CLUB and DL1 MK3 refer to the same standalone in-car logger. It records GPS, accelerometer and connected sensor data for analysis.

Specifications and capabilities
The manufacturer specifies 5 Hz GPS, a three-axis accelerometer, SD/SDHC card storage and eight analogue inputs; additional inputs and interfaces depend on options. It has no integral dashboard screen. Manufacturer specifications and documentation.
Data analysis software
The manufacturer lists Analysis for viewing and examining DL1 CLUB/MK3 recordings; retrieve the recorded run using the unit’s documented storage or USB workflow. Manufacturer documentation.

Download Race Technology software for Windows. Check the current version and any licence or hardware requirements; some advanced functions require a unit-linked licence. See the Race Technology software overview for features and licensing.
Pinouts and cabling
Data-port pinout; pin 7 is an accessory output, not the main power input. Check CAN and other options on the unit.
| Pin | Function |
|---|---|
| 1 | CAN low |
| 2 | RS232 port 1 RX (data in) |
| 3 | RS232 port 1 TX (data out) |
| 4 | RS232 port 2 TX (data out) |
| 5 | Ground |
| 6 | RS232 port 2 RX (data in) |
| 7 | +12 V output (250 mA limit) |
| 8 | CAN high |
| 9 | Not connected |
Manufacturer connection reference.
Check the connector number, version and options on the actual unit against the manufacturer's documentation before wiring. Disconnect power before changing connections.
Wiring overview
Functional wiring: connect the vehicle supply to the designated main power terminals, antenna to the GPS input, sensors to their specified inputs and an optional compatible ECU interface to the configured data port. Consult the connector illustration and source for exact terminals.
Return to the Race Technology manufacturer page.