Tuning Wiki

The DL1 CLUB and DL1 MK3 refer to the same standalone in-car logger. It records GPS, accelerometer and connected sensor data for analysis.

Race Technology DL1 CLUB (DL1 MK3)
Image: Race Technology, reproduced with permission; manufacturer source.

Specifications and capabilities

The manufacturer specifies 5 Hz GPS, a three-axis accelerometer, SD/SDHC card storage and eight analogue inputs; additional inputs and interfaces depend on options. It has no integral dashboard screen. Manufacturer specifications and documentation.

Data analysis software

The manufacturer lists Analysis for viewing and examining DL1 CLUB/MK3 recordings; retrieve the recorded run using the unit’s documented storage or USB workflow. Manufacturer documentation.

Race Technology Analysis showing graphs, lap times, video and a track map
Race Technology Analysis example; the available channels and video depend on the recording and enabled options. Image: Race Technology, reproduced with permission; manufacturer source.

Download Race Technology software for Windows. Check the current version and any licence or hardware requirements; some advanced functions require a unit-linked licence. See the Race Technology software overview for features and licensing.

Pinouts and cabling

Data-port pinout; pin 7 is an accessory output, not the main power input. Check CAN and other options on the unit.

PinFunction
1CAN low
2RS232 port 1 RX (data in)
3RS232 port 1 TX (data out)
4RS232 port 2 TX (data out)
5Ground
6RS232 port 2 RX (data in)
7+12 V output (250 mA limit)
8CAN high
9Not connected
DL1 CLUB data connector view
Connector diagram; consult the linked manufacturer drawing to confirm the view and variant.

Manufacturer connection reference.

Check the connector number, version and options on the actual unit against the manufacturer's documentation before wiring. Disconnect power before changing connections.

Wiring overview

DL1 CLUB system connections
Functional wiring overview; consult the manufacturer for actual connector pins and harnesses.

Functional wiring: connect the vehicle supply to the designated main power terminals, antenna to the GPS input, sensors to their specified inputs and an optional compatible ECU interface to the configured data port. Consult the connector illustration and source for exact terminals.

Return to the Race Technology manufacturer page.