Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Dynamometers
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

SAJ Test Plant Pvt. Ltd. manufactures dynamometers, engine test systems and control equipment. Its control range includes EXCEL-Y and EXCEL-R digital engine/dynamometer controllers, the DCATS engine-test acquisition and automation system, and separate hydraulic and eddy-current control units. Model, brake driver and test-cell interfaces must be matched to the installation. SAJ digital control systems.

SAJ EXCEL-R dynamometer control panel with display and two rotary controls.
SAJ EXCEL-R digital dynamometer controller. Image: SAJ Test Plant, used with permission.

Background

SAJ says it was established in Pune, India in 1969. Its published history describes a 1983–1997 joint venture with Froude Consine that transferred hydraulic and eddy-current dyno and control-system technology, and dates SAJ digital controllers and advanced automation development to 2003. These dates are the manufacturer's account and do not establish a launch date for every EXCEL or DCATS version.

Generic dynamometer speed-hold feedback loop with setpoint, controller, actuator, brake and speed sensor.
Generic speed-hold feedback: the controller adjusts load from measured speed. The actual sensor and actuator arrangement depends on the SAJ test installation. Original schematic for Tuning Wiki, CC BY 4.0.

EXCEL-Y and EXCEL-R digital controllers

The manufacturer description lists both EXCEL-Y and EXCEL-R for engine and dynamometer control. It describes digital PID loops for dyno loading and an engine throttle actuator, with constant-speed, constant-torque and constant-position modes; power-law control is listed as an option. Changing modes without requiring an idle-speed transition is described as a controller feature, subject to a properly configured installation.

The product page lists speed, torque, power and throttle-position displays; front-panel encoder controls or a touchscreen variant; analogue and digital I/O; alarm/trip settings; and an interface to a PC for programmed test sequences. It quotes a 100 Hz control rate. This is a controller loop specification, not a guaranteed complete test-cell response or measurement accuracy. The published description does not establish that the two EXCEL variants have identical input counts, included actuators or brake interfaces: request a model-specific quotation.

DCATS engine-test data acquisition and automation

SAJ describes its Digital Computer Aided Engine Test System (DCATS) as a PC-based engine-test acquisition, control and analysis system designed to work with SAJ hydraulic and eddy-current dynamometers and associated instrumentation. It supports manual operation or automated test sequences, configurable PID control, online displays and graphs, logged data, configured reports and alarm levels.

The supplier lists 16 configurable analogue scan channels, expandable up to 125, and remote monitoring/control options. Channel expansion requires the appropriate hardware and configuration; “up to 125” is not a guarantee that every standard package includes 125 sensors. Existing test-cell upgrades are advertised, but the page does not establish universal compatibility with third-party dynos or specific PC operating-system versions. Confirm the supplied software, interface, licence, hardware, update support and remote-access arrangements.

Other SAJ load controls

  • Remote Load Control (RLC): SAJ describes a push-button load-control and speed/torque indication system offered with sluice-gate hydraulic dynamometers. Match the valve actuator and hydraulics to the supplied system.
  • ECON open-loop excitation: an eddy-current dynamometer controller with digital speed and torque indication. It is described as open-loop; do not assume it automatically maintains a speed setpoint like a closed-loop PID package.

Source: SAJ digital control page.

Compatible dynos, brakes and commissioning

SAJ manufactures eddy-current and hydraulic engine dynamometers, including sluice-gate and pressure-controlled water-brake families. DCATS is specifically described for SAJ hydraulic and eddy-current systems, with suitable SAJ instrumentation. Controller output, brake-coil power electronics, water valve, throttle actuator, speed and torque sensors, cooling and protection must be configured as one installation. A named software package does not make a passive absorber capable of motoring or operation beyond its torque–speed and cooling limits.

For an existing dyno, provide the supplier with the brake and controller models, field or valve details, sensor types and ranges, expected test modes and existing wiring. Ask for documented compatibility, included parts, power supply, calibration, interlocks and support. Dynamometer World is a UK supplier that lists SAJ-related equipment and refurbishment. See also dynamometer control systems and the controller comparison.