SAJ Test Plant Pvt. Ltd. manufactures dynamometers, engine test systems and control equipment. Its control range includes EXCEL-Y and EXCEL-R digital engine/dynamometer controllers, the DCATS engine-test acquisition and automation system, and separate hydraulic and eddy-current control units. Model, brake driver and test-cell interfaces must be matched to the installation. SAJ digital control systems.

Background
SAJ says it was established in Pune, India in 1969. Its published history describes a 1983–1997 joint venture with Froude Consine that transferred hydraulic and eddy-current dyno and control-system technology, and dates SAJ digital controllers and advanced automation development to 2003. These dates are the manufacturer's account and do not establish a launch date for every EXCEL or DCATS version.
SAJ dynamometers and absorber families
SAJ's product range extends beyond controls to complete engine-test dynamometers, vehicle and transmission systems. Its published timeline traces the business to Dynamic Engineering in 1969, the first sluice-gate hydraulic dyno to 1971, PC-based test-cycle automation to 1988 and the addition of several eddy-current sizes to 2009. It describes regenerative chassis dynamometers developed in 2011 and a bidirectional 2,000 kW hydraulic dyno developed during 2017–2021. These are historical milestones, not confirmation that each old model is currently available.

SE / AG eddy-current engine dynamometers
The SAJ SE / AG specification table describes bidirectional eddy-current absorbers with twin energising coils and low rotating inertia. Shaft rotation and the magnetic field induce currents in conductive parts; electrical excitation regulates resisting torque and the resulting heat must be removed. SAJ lists water supply and loss-plate temperature monitoring. Water cooling does not make an eddy-current absorber a water brake. The following examples come from SAJ's general SE / AG table; speeds shown are its standard maximum, not a point at which the other maxima are necessarily available.
| Published model | Maximum power | Maximum torque | Standard maximum speed |
|---|---|---|---|
| SE / AG 5 | 5 kW | 30 N·m | 10,000 rpm |
| SE / AG 30 | 30 kW | 95 N·m | 12,000 rpm |
| SE / AG 80 | 80 kW | 160 N·m | 9,000 rpm |
| SE / AG 150 | 150 kW | 500 N·m | 8,000 rpm |
| SE / AG 250 | 250 kW | 1,200 N·m | 6,000 rpm |
| SE / AG 350 | 350 kW | 1,600 N·m | 6,000 rpm |
| SE / AG 400 | 400 kW | 2,000 N·m | 4,500 rpm |
| SE / AG 720 | 720 kW | 4,500 N·m | 3,750 rpm |
SAJ also lists SE / AG 10, 20, 200 and 500 in that table and high-speed options for several sizes. Its separate SE air-gap page gives different speed entries for some small and high-speed versions. Do not interchange published limits between generations or machines; confirm the nameplate, exact configuration and current data sheet with SAJ.
Pressure-controlled hydraulic water brakes

SAJ describes this hydraulic family as water brakes, listing a servo-controlled outlet valve and water-supply pressure switch. Rotation transfers energy to water inside the brake, and outlet regulation changes loading. The named SH / F series table includes SH 300 / F 18 (300 kW, 1,100 N·m), SH 750 / F 24 (750 kW, 2,700 N·m), SH 1200 / F 30 (1,200 kW, 5,000 N·m), SH 1640 / F 35 (1,640 kW, 7,121 N·m), SH 3300 / F 47 (3,300 kW, 18,500 N·m) and SH 6700 / F 63 (6,700 kW, 50,000 N·m). SAJ identifies standard and high-speed versions separately; the ordinary table describes these as unidirectional, while its historical timeline mentions a separately developed bidirectional hydraulic machine. Do not assume rotation direction or upgrade interchangeability.
Sluice-gate hydraulic water brakes
The AWM sluice-gate family regulates water-brake loading and is offered with remote load control. Published examples include AWM 50 (150 hp; 280 N·m), AWM 150 (250 hp; 702 N·m), AWM 700 (700 hp; 3,277 N·m), AWM 1500 (1,500 hp; 7,804 N·m) and AWM 2000 (2,000 hp; 9,892 N·m). The model number is not consistently the rated horsepower: use the individual specification. Water is the working medium; this should not be confused with an oil-pump hydraulic hub dynamometer.
Choosing a machine: the listed power, torque and speed are separate maxima rather than simultaneous continuous ratings. Verify each actual unit's torque–speed and duty curves, direction, installation and coupling limits, brake-water flow and temperature, coil or valve interface, sensors and safety interlocks. Product pages show published families but do not establish present stock, all generations, or retrofit interchangeability. Ask SAJ or an authorised supplier for the exact machine and controller documentation. See eddy-current brakes and water and oil hydraulic brakes.
EXCEL-Y and EXCEL-R digital controllers
The manufacturer description lists both EXCEL-Y and EXCEL-R for engine and dynamometer control. It describes digital PID loops for dyno loading and an engine throttle actuator, with constant-speed, constant-torque and constant-position modes; power-law control is listed as an option. Changing modes without requiring an idle-speed transition is described as a controller feature, subject to a properly configured installation.
The product page lists speed, torque, power and throttle-position displays; front-panel encoder controls or a touchscreen variant; analogue and digital I/O; alarm/trip settings; and an interface to a PC for programmed test sequences. It quotes a 100 Hz control rate. This is a controller loop specification, not a guaranteed complete test-cell response or measurement accuracy. The published description does not establish that the two EXCEL variants have identical input counts, included actuators or brake interfaces: request a model-specific quotation.
DCATS engine-test data acquisition and automation
SAJ describes its Digital Computer Aided Engine Test System (DCATS) as a PC-based engine-test acquisition, control and analysis system designed to work with SAJ hydraulic and eddy-current dynamometers and associated instrumentation. It supports manual operation or automated test sequences, configurable PID control, online displays and graphs, logged data, configured reports and alarm levels.
The supplier lists 16 configurable analogue scan channels, expandable up to 125, and remote monitoring/control options. Channel expansion requires the appropriate hardware and configuration; “up to 125” is not a guarantee that every standard package includes 125 sensors. Existing test-cell upgrades are advertised, but the page does not establish universal compatibility with third-party dynos or specific PC operating-system versions. Confirm the supplied software, interface, licence, hardware, update support and remote-access arrangements.
Other SAJ load controls
- Remote Load Control (RLC): SAJ describes a push-button load-control and speed/torque indication system offered with sluice-gate hydraulic dynamometers. Match the valve actuator and hydraulics to the supplied system.
- ECON open-loop excitation: an eddy-current dynamometer controller with digital speed and torque indication. It is described as open-loop; do not assume it automatically maintains a speed setpoint like a closed-loop PID package.
Source: SAJ digital control page.
Compatible dynos, brakes and commissioning
SAJ manufactures eddy-current and hydraulic engine dynamometers, including sluice-gate and pressure-controlled water-brake families. DCATS is specifically described for SAJ hydraulic and eddy-current systems, with suitable SAJ instrumentation. Controller output, brake-coil power electronics, water valve, throttle actuator, speed and torque sensors, cooling and protection must be configured as one installation. A named software package does not make a passive absorber capable of motoring or operation beyond its torque–speed and cooling limits.
For an existing dyno, provide the supplier with the brake and controller models, field or valve details, sensor types and ranges, expected test modes and existing wiring. Ask for documented compatibility, included parts, power supply, calibration, interlocks and support. Dynamometer World is a UK supplier that lists SAJ-related equipment and refurbishment. See also dynamometer control systems and the controller comparison.