Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Datalogging and telematics
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Race Technology

Industrial and vehicle-testing data logger with GPS, accelerometers, sensor inputs and SD data storage.

Race Technology DL2
Image: Race Technology, reproduced with permission; manufacturer source.

Specifications and capabilities

The manufacturer lists 5 Hz GPS, 12 analogue channels, four frequency inputs, CAN and serial interfaces, with higher-rate and other options available. Confirm fitted options and card compatibility. Manufacturer specifications and documentation.

Pinouts and cabling

Front 9-way male serial connector:

Pin / terminalFunction
2RS232 RX
3RS232 TX
5Ground
7+V input/output

Front 9-way male CAN connector:

Pin / terminalFunction
2CAN low
3 and 6Ground
7CAN high
9+V input/output

On the 25-way analogue connector the manufacturer lists pins 1–8 for ADC 1–8, pins 9–12 for ADC 9–12 / outputs 1–4, and pins 14–25 as ground. Pin 13 is not assigned in the cited table; consult the source for all connectors and orientation.

Manufacturer connection reference.

Check the connector number, version and options on the actual unit against the manufacturer's documentation before wiring. Disconnect power before changing connections.

Wiring overview

Race Technology DL2 functional wiring overview
Functional wiring overview; not a connector-face diagram. Confirm actual connections with the manufacturer.

Return to the Race Technology manufacturer page.