Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
ABS / DSC
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Bosch, Continental, Haltech, MoTeC, Racelogic, RaceTCS, SCS Delta

ABS and traction systems directory · Bosch · ATE / Teves / Continental · Other manufacturers · Motorsport and standalone

Motorsport ABS controls hydraulic brake pressure to manage wheel lock under braking. Traction control limits driven-wheel spin under power, commonly through engine torque intervention. A standalone traction controller or engine ECU feature is not by itself a hydraulic ABS or a complete stability-control system.

Motorsport and standalone ABS

Manufacturer and modelWhat the source identifies
Bosch Motorsport ABS M4 Kit / M4 ClubsportEarlier motorsport kit documented in Bosch's archive. M4 is distinct from M5; Bosch's M5 manual warns that M4 pressure sensors are not compatible with M5. Bosch M4 Clubsport; M5 manual.
Bosch Motorsport ABS M5 Kit 1, Kit 2 and ClubsportBosch specifies front-, rear- and four-wheel-drive use and describes differences between kits, including loom, map selection and optional functions. Four compatible active wheel-speed sensors and the specified pressure and motion sensors are part of the system design. Do not reuse an M4 loom or sensors without checking the M5 manual: Bosch warns of damage from incorrect wiring or sensors. Bosch M5 product and manual.
Continental Engineering Services RSX ABSA motorsport adaptation based on Continental MK 100 with a front/rear brake-circuit split and balance-bar application described in its technical manual. It includes a hydraulic/electronic control unit, motion sensor, pressure sensor and controls. RSX technical manual.
SCS Delta Motorsport ABSSCS describes this as a universal standalone kit; its FAQ says wheel-speed sensors connect directly to the ABS and speed data is made available to other equipment. Check the kit and installation requirements for the vehicle. SCS Delta product; SCS FAQ.

Standalone traction controllers

SystemIdentification
RaceTCS V2 / V3Separate wheel-speed-based traction controllers. The supplier describes intervention through injector or ignition signals; engine and wiring compatibility depend on version. The V2 manual restricts fuel-cut use on direct-injection engines. RaceTCS product and downloads; V2 manual.
Racelogic Traction ControlLegacy separate traction-control system with wheel-speed comparison and an adjustable controller; the manufacturer's support library lists it as discontinued. Racelogic legacy support; Traction Control manual.

Traction control within an engine ECU

  • MoTeC M1 GPR package lists traction and launch control among its race-car functions; GPR is an ECU software package, not an ABS hydraulic kit. MoTeC GPR.
  • Haltech Nexus VCU and Elite ECU: Haltech describes traction control in its guide for Nexus and Elite firmware 2.34 onwards, based on wheel-speed inputs and engine output intervention. Haltech traction-control guide.

Selection and integration

Confirm competition rules and the supplier's intended use; motorsport kits may be restricted to closed-course use. Check hydraulic circuit layout, wheel-speed sensor type and mounting, tyre circumference, motion and pressure sensors, power, CAN rate and messages, engine intervention method, calibration, warnings and fault behaviour for the exact equipment. Observe the maker's commissioning and service intervals and have brake work performed by a qualified specialist.

Manufacturer and individual model pages

Further model and wiring references

Aftermarket MK60 race conversions

MaBra MK60 Race ABS and MK-Motorsportteile MK60P are separately supplied, vehicle-configured race conversion systems. See their model pages for documented applications and the limits of available wiring information.