Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Datalogging and telematics
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
ECUMASTER

EDL-1 is a compact ECU serial data logger for ECUMASTER EMU Classic and EMU Black. It records over 200 channels at 25 Hz to a compatible FAT32 SDHC card and has Bluetooth and a battery-backed real-time clock. It does not work with EMU PRO, which logs directly to USB. Sources: product page and EDL-1 manual.

ECUMASTER EDL-1 data logger and memory card
ECUMASTER EDL-1 logger and SD card. Image: ECUMASTER; reproduced with permission. Manufacturer source.

Specifications

The manufacturer’s manual v2.8 lists 5–20 V operating supply, 64 × 45 × 18 mm, 50 g, −40 to +85 °C, two status LEDs and FAT32 SDHC cards up to 32 GB. Card and firmware compatibility should be checked against the current supported-card list. Bluetooth supports local live data and is not itself remote telemetry.

Connector and pinout

The manual identifies Molex 34793-0040 and shows the connector face, pin 1 left to pin 4 right. Verify actual component markings and orientation. EDL-1 manual, installation section.

PinFunction
1Ground
2RXD
3TXD
4Power supply
ECUMASTER EDL-1 four connections to EMU BLACK B connector
Original wiki wiring illustration of the EDL-1 to EMU BLACK example; this is a logical diagram, not a connector-face view. Source: ECUMASTER EDL-1 manual, installation section. Verify the exact ECU and connector before wiring.

Wiring

For the manufacturer’s EMU BLACK example, EDL pins 1–4 connect respectively to ECU B39 sensor ground, B11 RS232 TXD, B24 RS232 RXD and B26 +5 V. For the documented EMU Classic example, pins 1–4 connect to ECU pins 4 ground, 2 TXD, 1 RXD and 5 +5 V. ECUMASTER calls for shielded RXD/TXD and also documents an external 12 V and ground option. Check supply capacity, ECU revision and the manual before wiring; do not substitute an unverified ECU pinout.

Manufacturer overview: ECUMASTER dataloggers and displays. Confirm revision, loom, connector and options before installation.