ECD-V and common rail
Denso's September 2007 common-rail manual, document 00400534E, defines ECD as electronically controlled diesel and then splits the systems. The ECD-V series, V3, V4 and V5, is electronic control of a VE distributor pump. Common rail is a supply pump, a rail and injectors. V3 and V5 are described for passenger cars and RVs. V4 can also support small trucks. Common rail is described both for trucks and for passenger cars and RVs, and the manual adds a second generation that covers large vehicles and passenger cars. The distributor family is on Denso ECD-V. The common-rail controller is on Denso common-rail ECU.
The same manual's chart prints 60 MPa, 100 MPa and 130 MPa on the distributor side, and 180 MPa on the common-rail side. Which of 60, 100 and 130 belongs to which V number is not a clean column in the text, so those three maxima are left on common-rail diesel fuel systems, which already records them for the ECD-V family.
The controller and the pump
Inside common rail the manual divides the control system into sensors, the engine ECU, the EDU, and the actuators. The engine ECU calculates the injection quantity and timing. The EDU is the high-speed injector driver. Some ECUs contain that charge circuit, and those have no separate EDU. The EDU is not a second engine calibration.
The supply-pump sequence in the same manual is a date sequence for the fuel system: the truck common rail in 1995, the passenger-car system with the HP2 pump in 1999, the HP3 in 2001, and the three-cylinder HP4 in 2004. Those pump types are on common-rail supply pumps. The injector sequence, X1, X2 and G2, is on common-rail diesel injectors. Neither sequence is an ECU type code.
Sources
- Denso, Common Rail System operation, document 00400534E, September 2007. ECD-V against common rail, the engine ECU and the EDU, and the pump years. Mirror: 00400534E.
- Denso, ECD-V series manual, 2000. Distributor types ECD-V3, ECD-V3 (ROM), ECD-V4 and ECD-V5. Mirror: ECD-V series.
Volvo Drive-E tuning reference
See the Volvo Denso Drive-E ECU tuning guide for older SH72546 and newer Gen2 programming references and model-specific engine information.