Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Dynamometers
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

An engine dynamometer tests an engine mounted in a test cell, with its output shaft coupled to a controlled load. The measurement boundary is at the coupling or absorber, subject to the location of the torque sensor and any losses between engine and sensor. It excludes a vehicle's gearbox, differential and tyres, but the reported result still depends on engine accessories and test configuration.

Engine on a stand drives a guarded coupling and absorber, with a reaction load cell and shaft speed pickup.
An engine test-cell arrangement using a reaction torque arm and separate speed pickup. Original schematic created for Tuning Wiki; based on the technical sources cited in this article.

Principle of operation

The engine turns the absorber through a suitable guarded coupling. An absorber resists the rotation. A reaction torque arm and load cell or an inline torque transducer measures torque; a speed pickup measures shaft speed. Mechanical power is P = Tω, with torque in newton metres and angular speed in radians per second. Equivalently, power in kW is torque in N·m multiplied by rpm and divided by approximately 9549. SuperFlow: engine and dynamometer inertia.

Water brakes dissipate energy by fluid circulation and heating; eddy-current brakes dissipate it electromagnetically. Electric AC or DC machines can absorb power, and a suitably configured machine can also motor the engine. A regenerative drive can return some absorbed electrical energy to the supply, whereas other installations use a load bank. Capability, limits and cooling depend on the particular machine. SuperFlow AC engine dynamometer.

Steady state and sweeps

In steady-state testing the controller adjusts absorber load to hold a selected engine speed while the operator sets throttle and records stable torque, temperatures, fuel, air and other channels. This permits controlled mapping at selected operating points. In a sweep the engine accelerates through the range at a chosen or resulting rate. Some torque accelerates the engine and coupling inertia rather than reaching the absorber, so a sweep needs an appropriate inertia correction if the desired result includes that component. The correction depends on the actual rotating assembly and rate of acceleration; uncorrected transient and steady values are not automatically identical. SuperFlow inertia discussion.

Test-cell installation

The engine needs a secure stand, correctly aligned and rated coupling and guards, cooling and coolant control, oil, fuel delivery, intake supply, exhaust extraction and control/monitoring connections. Fans and cell ventilation must suit the engine and absorber. The SuperFlow SF-Powermark system illustrates a direct engine coupling, controlled engine cooling and water-brake load control. Follow the specific test-cell procedures and limits.

What a result means

Record the torque measurement location, engine speed, fuel, temperatures, atmospheric conditions, correction standard, sweep rate and accessories fitted. An output with a test exhaust, pump and intake may differ from the same engine installed in a vehicle. Engine-dyno output is not wheel power; drivetrain losses and tyres account for part of the difference, but no single fixed percentage applies to every vehicle.

Manufacturer and supplier examples

SuperFlow’s SF-Powermark is a water-brake engine test system with a compliant coupling, docking cart and inlet/outlet valve control. Advanced Dyno Solutions lists engine-dyno equipment among its offered services and equipment; individual machines and availability vary.

SuperFlow SF-Powermark engine dynamometer and engine docking cart.
SF-Powermark engine dynamometer and cart. Image: SuperFlow; used by permission.

See also: Dynamometers overview · Rolling roads · Engine dynamometers · Hub dynamometers · On-car and portable systems · Inertia dynamometers.

Related company profiles

Froude · SuperFlow · Power Test · HORIBA.