A flywheel is a rotating component attached to an engine's crankshaft. Its rotational inertia stores energy between combustion events and helps the crankshaft resist sudden changes in speed. In a manual transmission it also usually provides a friction surface and mounting points for the clutch. Many flywheels carry a starter ring gear; some designs also have a separate engine-speed sensor target. The details depend on the application. RAM Clutches: flywheels; Schaeffler: DMF technology and installation.
What a flywheel does
Combustion produces torque in pulses rather than as a perfectly even flow. A rotating mass helps smooth the resulting speed variation and supplies stored energy when load rises, such as when a clutch is engaged. A dual-mass flywheel adds a spring-and-damper system that reduces the torsional vibration transmitted into the driveline. Inertia and torsional damping are related to different aspects of behaviour; they should not be treated as the same thing. Schaeffler: DMF design and torsional vibration.
Types at a glance
| Arrangement | Typical role | Important distinction |
|---|---|---|
| Single-mass flywheel (SMF) | Rigid flywheel and clutch friction face on many manual transmissions. | The clutch disc may have its own torsional springs; designs vary. |
| Dual-mass flywheel (DMF) | Two masses connected by a spring and damping system to reduce vibration. | Used with some manual, dual-clutch and other transmission arrangements. It is an assembly, not simply a heavy solid wheel. |
| Flexplate or driveplate | Commonly connects the crankshaft to a torque converter in an automatic. | Usually a different interface from a manual clutch friction flywheel; terminology and assemblies vary. |
Continue to clutches for friction clutch types, manual operation and automated clutch control.
Explore the section
- Flywheel inertia and engine response — mass distribution, stored energy and real driving effects.
- Single-mass and dual-mass flywheels — construction and vibration control.
- Lightweight and performance modifications — materials, launch behaviour and trade-offs.
- Dual-mass to single-mass conversions — matched kits, competing manufacturer advice and checks.
- Faults, noise and diagnosis — symptoms, alternative causes and inspection limits.
- Servicing, fitment and balancing — clutch interfaces, fasteners, triggers and machining.
- Flexplates and dual-clutch flywheels — automatic and dual-clutch layouts.
For a specific ECU and engine-control perspective, see ME7 lightweight flywheel, clutch and stalling diagnosis. Always identify the exact engine, transmission and fitted parts before ordering or applying service measurements.