Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Flywheels
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 1 to revision 2

Removed text is struck through; added text is highlighted.

A flywheel is a rotating component attached to an engine's crankshaft. Its rotational inertia stores energy between combustion events and helps the crankshaft resist sudden changes in speed. In a manual transmission it also usually provides a friction surface and mounting points for the clutch. Many flywheels carry a starter ring gear; some designs also have a separate engine-speed sensor target. The details depend on the application. RAM Clutches: flywheels; Schaeffler: DMF technology and installation.

Representative manual-transmission layouts; actual components and damper locations vary. Original diagram prepared for Tuning Wiki, CC BY 4.0.

What a flywheel does

Combustion produces torque in pulses rather than as a perfectly even flow. A rotating mass helps smooth the resulting speed variation and supplies stored energy when load rises, such as when a clutch is engaged. A dual-mass flywheel adds a spring-and-damper system that reduces the torsional vibration transmitted into the driveline. Inertia and torsional damping are related to different aspects of behaviour; they should not be treated as the same thing. Schaeffler: DMF design and torsional vibration.

Types at a glance

ArrangementTypical roleImportant distinction Single-mass flywheel (SMF)Rigid flywheel and clutch friction face on many manual transmissions.The clutch disc may have its own torsional springs; designs vary. Dual-mass flywheel (DMF)Two masses connected by a spring and damping system to reduce vibration.Used with some manual, dual-clutch and other transmission arrangements. It is an assembly, not simply a heavy solid wheel. Flexplate or driveplateCommonly connects the crankshaft to a torque converter in an automatic.Usually a different interface from a manual clutch friction flywheel; terminology and assemblies vary.

Continue to clutches for friction clutch types, manual operation and automated clutch control.

Explore the section

Flywheel inertia and engine response — mass distribution, stored energy and real driving effects. Single-mass and dual-mass flywheels — construction and vibration control. Lightweight and performance modifications — materials, launch behaviour and trade-offs. Dual-mass to single-mass conversions — matched kits, competing manufacturer advice and checks. Faults, noise and diagnosis — symptoms, alternative causes and inspection limits. Servicing, fitment and balancing — clutch interfaces, fasteners, triggers and machining. Flexplates and dual-clutch flywheels — automatic and dual-clutch layouts.

For a specific ECU and engine-control perspective, see ME7 lightweight flywheel, clutch and stalling diagnosis. Always identify the exact engine, transmission and fitted parts before ordering or applying service measurements.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Flywheels

A flywheel is a rotating component attached to an engine's crankshaft. Its rotational inertia stores energy between combustion events and helps the crankshaft resist sudden changes in speed. In a manual transmission it also usually provides a friction surface and mounting points for the clutch. Many flywheels carry a starter ring gear; some designs also have a separate engine-speed sensor target. The details depend on the application. RAM Clutches: flywheels; Schaeffler: DMF technology and installation.

Comparison of crankshaft, single-mass flywheel and clutch with a dual-mass flywheel containing springs between its two masses
Representative manual-transmission layouts; actual components and damper locations vary. Original diagram prepared for Tuning Wiki, CC BY 4.0.

What a flywheel does

Combustion produces torque in pulses rather than as a perfectly even flow. A rotating mass helps smooth the resulting speed variation and supplies stored energy when load rises, such as when a clutch is engaged. A dual-mass flywheel adds a spring-and-damper system that reduces the torsional vibration transmitted into the driveline. Inertia and torsional damping are related to different aspects of behaviour; they should not be treated as the same thing. Schaeffler: DMF design and torsional vibration.

Types at a glance

ArrangementTypical roleImportant distinction
Single-mass flywheel (SMF)Rigid flywheel and clutch friction face on many manual transmissions.The clutch disc may have its own torsional springs; designs vary.
Dual-mass flywheel (DMF)Two masses connected by a spring and damping system to reduce vibration.Used with some manual, dual-clutch and other transmission arrangements. It is an assembly, not simply a heavy solid wheel.
Flexplate or driveplateCommonly connects the crankshaft to a torque converter in an automatic.Usually a different interface from a manual clutch friction flywheel; terminology and assemblies vary.

Explore the section

For a specific ECU and engine-control perspective, see ME7 lightweight flywheel, clutch and stalling diagnosis. Always identify the exact engine, transmission and fitted parts before ordering or applying service measurements.

Revision 2: Flywheels

A flywheel is a rotating component attached to an engine's crankshaft. Its rotational inertia stores energy between combustion events and helps the crankshaft resist sudden changes in speed. In a manual transmission it also usually provides a friction surface and mounting points for the clutch. Many flywheels carry a starter ring gear; some designs also have a separate engine-speed sensor target. The details depend on the application. RAM Clutches: flywheels; Schaeffler: DMF technology and installation.

Comparison of crankshaft, single-mass flywheel and clutch with a dual-mass flywheel containing springs between its two masses
Representative manual-transmission layouts; actual components and damper locations vary. Original diagram prepared for Tuning Wiki, CC BY 4.0.

What a flywheel does

Combustion produces torque in pulses rather than as a perfectly even flow. A rotating mass helps smooth the resulting speed variation and supplies stored energy when load rises, such as when a clutch is engaged. A dual-mass flywheel adds a spring-and-damper system that reduces the torsional vibration transmitted into the driveline. Inertia and torsional damping are related to different aspects of behaviour; they should not be treated as the same thing. Schaeffler: DMF design and torsional vibration.

Types at a glance

ArrangementTypical roleImportant distinction
Single-mass flywheel (SMF)Rigid flywheel and clutch friction face on many manual transmissions.The clutch disc may have its own torsional springs; designs vary.
Dual-mass flywheel (DMF)Two masses connected by a spring and damping system to reduce vibration.Used with some manual, dual-clutch and other transmission arrangements. It is an assembly, not simply a heavy solid wheel.
Flexplate or driveplateCommonly connects the crankshaft to a torque converter in an automatic.Usually a different interface from a manual clutch friction flywheel; terminology and assemblies vary.

Continue to clutches for friction clutch types, manual operation and automated clutch control.

Explore the section

For a specific ECU and engine-control perspective, see ME7 lightweight flywheel, clutch and stalling diagnosis. Always identify the exact engine, transmission and fitted parts before ordering or applying service measurements.