Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Tuning Tools
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
Flashing and tuning tools
Manufacturers
EVC
EVC BDM100 module with USB cable and ribbon cables
EVC BDM100. Image credit: EVC electronic. Image source.

← EVC electronic

BDM100 is a USB background-debug interface from EVC, the publisher of WinOLS. EVC describes it for the Motorola MPC555 to MPC565 generation, whose internal flash cannot be read in a socket programmer. The module connects to the BDM pads on the board. It takes its own power from USB. The control unit needs a separate 12 V supply. Connection uses the BDM140 positioning frame and a probe in the BDM141 to BDM147 series, chosen for the board.

BdmToGo is a separate program that can read and program with the BDM100 instead of WinOLS. EVC says its files are encrypted and can be opened only in WinOLS.

EVC publishes a list of controllers it had tested, with examples in the Bosch EDC16, EDC7, ME9 and MED9 families and in Siemens, Delphi and Marelli units of that processor generation. A row on that list is evidence for the stated hardware, not for every later revision. Pad layout and the probe number have to match the board in front of you.

Sources

EVC: BDM100; EVC: BdmToGo.