
BDM100 is a USB background-debug interface from EVC, the publisher of WinOLS. EVC describes it for the Motorola MPC555 to MPC565 generation, whose internal flash cannot be read in a socket programmer. The module connects to the BDM pads on the board. It takes its own power from USB. The control unit needs a separate 12 V supply. Connection uses the BDM140 positioning frame and a probe in the BDM141 to BDM147 series, chosen for the board.
BdmToGo is a separate program that can read and program with the BDM100 instead of WinOLS. EVC says its files are encrypted and can be opened only in WinOLS.
EVC publishes a list of controllers it had tested, with examples in the Bosch EDC16, EDC7, ME9 and MED9 families and in Siemens, Delphi and Marelli units of that processor generation. A row on that list is evidence for the stated hardware, not for every later revision. Pad layout and the probe number have to match the board in front of you.