Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Denso diesel
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Engine ECU and EDU

In Denso's September 2007 common-rail manual the engine ECU receives the sensors, calculates the injection quantity and the injection timing, and commands the actuators. The EDU, the electronic driving unit, is there so the injectors can be driven quickly. The manual also describes controllers that keep that charge circuit inside the ECU. Those have no separate EDU. Replacing an EDU does not replace the engine calibration, and a controller with the charge circuit inside is still the engine ECU.

The manual dates the systems, not a series of ECU type codes: truck common rail in 1995, the passenger-car system with the HP2 pump in 1999, the HP3 in 2001, and the three-cylinder HP4 in 2004. First generation and second generation, in the injector chart, belong to that fuel system. The pumps are on common-rail supply pumps and the injectors, including the QR code that later replaced the correction resistor, are on common-rail diesel injectors.

Numbers from the service manuals

The supplier number sits beside the vehicle maker's number. These rows are the ones the manuals print. They are not a complete list.

Manual Application it names Denso ECU Vehicle maker's number
Prado 1KD bulletin Land Cruiser Prado KDJ120 and KDJ125, 1KD-FTV, from September 2004, HP3 pump 175800-7251 and 175800-7242 Toyota 89661-6A350 and 89661-6A330
Triton 00400554E, 2005 Triton, Thailand, from June 2005, 4D56 four-wheel drive MA275800-425# Mitsubishi 1860A392
Triton 00400554E 4D56, two-wheel drive, manual MA275800-431# Mitsubishi 1860A523
Triton 00400554E 4D56, two-wheel drive, automatic MA275800-432# Mitsubishi 1860A524
Triton 00400554E 4M41, four-wheel drive MA275800-357# Mitsubishi 1860A390
Toyota i-ART bulletin Hilux for Brazil, April 2012, G3Pi piezo injectors, HP3, 200 MPa MA275900-532# to MA275900-535# Toyota numbers in the 89666-0K series

The hash in the Denso numbers is the manual's own mark for the final character. On the Prado bulletin the rail is described as made by another manufacturer, so the rail supplier and the ECU supplier are not the same part. The i-ART bulletin expands the name as intelligent Accuracy Refinement Technology: a pressure sensor in the injector feeds the ECU, and the ECU corrects the injection rate. That is cylinder feedback. It is not a software version.

A June 2003 Hino manual, document E-03-03, uses the name ECD-U2 for the common-rail system on the J08C and J05C engines. The 2007 overview does not use ECD-U2 as the name of every common-rail ECU. ECD-U2 stays the name on that Hino manual.

A repairer's generation

ecu.eu files some later Mitsubishi diesel units under the heading Denso Common Rail Gen. 3, including Denso numbers in the 275700 series. That heading is not in the 2007 manual. Denso's own first and second generation are the rail system and the injectors. ECD-V is the distributor family and is a different controller. A Mitsubishi 1860 number paired with an E6T number is Mitsubishi Electric petrol.

Processor

Denso's service documents do not name the engine ECU microcontroller. The AutoTuner ECU compatibility list of 28 October 2026 (tool compatibility listing) groups Denso units by the engine names 4D56, 4M41, 4N13, 4N14 and 4N15, the Mitsubishi common-rail diesels, with SH7058 or SH7059 microcontrollers (Renesas SuperH SH-2 family). This is a tool vendor's statement for its listed vehicles; it does not tie a given MA275800 part number to a particular chip.

Connector pinout

Denso's June 2005 Triton document (00400554E) prints the terminal assignment of the engine ECU for the 4D56 and 4M41: connector A (A01 to A81) and connector B (B01 to B40). It is redrawn as a numbered pin index on Denso common-rail ECU connector pinout (Mitsubishi Triton 4D56/4M41). It applies to that vehicle; other common-rail ECUs, including the Toyota 175800 and MA275900 units above, are not covered by it. Diagram redrawn by Tuning Wiki from Denso document 00400554E (manufacturer documentation).

Sources

  • Denso, Common Rail System operation, document 00400534E, September 2007. Engine ECU, EDU, and the 1995, 1999, 2001 and 2004 system dates. Mirror: 00400534E.
  • Denso ECD service bulletin, Toyota Land Cruiser Prado 1KD. KDJ120 and KDJ125 from September 2004, ECU 175800-7251 and 175800-7242. Mirror: Prado 1KD bulletin.
  • Denso, Triton 4D56/4M41, document 00400554E, June 2005. ECU rows MA275800 and the engine ECU connector terminals (section 15.2). Mirror: 00400554E. Accessed 19 November 2026.
  • Denso, Toyota i-ART common-rail bulletin. Hilux for Brazil, April 2012, ECU MA275900-532# to MA275900-535#. Mirror: i-ART bulletin.
  • Denso, Common Rail System for Hino J08C/J05C, document E-03-03, June 2003. The name ECD-U2. E-03-03 text.
  • ecu.eu, Denso Common Rail Gen. 3. A repairer's heading for later Mitsubishi diesel numbers. Gen. 3 index. Accessed 2026-11-13.
  • AutoTuner, ECU compatibility list (PDF export, 28 October 2026): Denso 4D56, 4M41, 4N13, 4N14, 4N15 with SH7058/SH7059. Accessed 19 November 2026.