Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Carb Tuning
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Alpine, Renault, Solex, Weber

The cars

The Renault 8 Gordini (1964 to 1970) and the Renault 12 Gordini (1970 to 1974) were the factory-tuned twin-carburettor versions of two very different Renaults. The R8 uses the small Cléon-Fonte pushrod engine; the R12 Gordini uses a larger aluminium engine borrowed from another model. Wider Renault performance history is on Renault: history and cars and the family context for the Cléon-Fonte on Renault 5 Alpine and Alpine Turbo notes.

Renault 8 Gordini

Item1100 (R1134, 1964 to 1966)1300 (R1135, 1966 to 1970)
Cars built2,6268,981
Displacement1,108 cc (type 804-00), 70 x 72 mm1,255 cc (type 812-00), 74.5 x 72 mm
PowerAbout 80 ch DIN at 6,500 rpm (a period figure of 95 ch SAE is also quoted)88 ch DIN (110 ch SAE) at 6,750 rpm
Torque8.9 mkg at 4,000 rpm12.7 mkg at 5,000 rpm
CarburettorsTwo Solex 40 PHH2 double-bodyTwo Weber 40 DCOE double-body (type 25/23, later 29/30)
Gearbox4-speed5-speed
Weight795 kg855 kg

One source adds that Weber carburettors replaced the Solex on the 1100 in 1966, while its own chronology shows Webers appearing on some cars in 1965, so the changeover date is unsettled. Compression ratios are not stated in the article read.

The Gordini treatment beyond the carburettors was extensive: a stronger five-bearing crankshaft, a redesigned cylinder head, an oil cooler, a dedicated air box, filter and Ducellier ignition, stiffer springs, double rear half-shaft dampers, reinforced front wishbones, thicker brake discs and a quicker steering rack. The 1300 also carries thinner door and wing panels and a small extra front fuel tank. A Weber 40 DCOE conversion kit is sold for the R8 by classic parts suppliers.

Renault 12 Gordini

The R12 Gordini uses a 1,565 cc all-aluminium engine taken from the Renault 16 TS with two double-barrel Weber carburettors. Output is given as 125 bhp (93 kW) by one specification page and 113 PS (111 bhp) by another, and carburettor size is given as 40 DCOE in some sources and 45 DCOE in others. The base R12 specification (1,289 cc, single Weber 32 DAR) is a different engine and should not be mixed with the Gordini data.

What is missing

No jet sizes, emulsion tubes, air correctors, choke diameters, cam timing or ignition curves were found for either car. For jetting, use a period workshop manual or a Weber chart for the exact carburettor tag number, and follow the general method on Carburettor tuning, jetting and setup and Carburettor synchronisation, faults and rebuilds.

Sources