Tuning Wiki

Cars

The 1976 Renault 5 Alpine (Gordini in some markets) took the Cléon-Fonte 1397 cc engine, now with a hemispherical-chamber crossflow head, to 93 PS. The Alpine Turbo used the same 1397 block at about 110 hp. Model history is on Alpine: history and cars and the Renault 5 pages. For the later Super 5 see Renault 5 GT Turbo tuning and upgrades.

Factory figures as sourced

ItemAlpine (93 PS)Source quality
Displacement1397 ccSeveral
CarburettorWeber 32 DIR per a specs database; an Autocar article refers to "twin Webers" (probably a twin-barrel unit)Conflicting, check on the car
Compression ratio10:1 in two databases. A 7.0:1 figure appears for the turbo version in one databaseDatabase figures, unverified
Power93 PS (about 92 hp), up from 64 bhp in the standard car per AutocarSeveral

Owner discussions show 1397 cc cars fitted with a Weber 32 DIR, and a Weber 32 DIR 62/9700 is sold as a replacement for the 1300 cc R5. Identify the carburettor number on the car before ordering parts. The Alpine Turbo's carburettor is not stated in any source reviewed.

Parts and upgrade notes

  • Gasket kits, timing chains and Ducellier igniter heads are sold for the Alpine and Alpine Turbo 1397, so maintenance parts exist.
  • Adjustable cam wheels are sold for the Super GT Turbo and may be relevant, but fitment to the Alpine is unconfirmed.
  • Having the standard cam reground is suggested as the easiest cam change. That advice relates to a different Renault engine, so treat it as a lead only.
  • Alpine produced period tuning kits, according to one source, and original parts are now hard to find.

Not established

Jet sizes, emulsion tubes, cam timing and lift, valve sizes, dyno results and ignition curves are all undocumented here. A FIA historic homologation form exists for a Renault 5 group N car, but it is a scanned image that could not be read, so its contents are not cited. Use the general guidance on Carburettor tuning, jetting and setup and validate with a wideband.

Sources