Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Siemens SID
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 2 to revision 5

Removed text is struck through; added text is highlighted.

K9K 1.5 dCi 90 engine in a Renault Clio IV. The Clio IV 1.5 dCi is tool-listed with SID310; the controller is not visible in the photograph. Image: Arnaud FRANOUX, CC BY-SA 4.0, via Wikimedia Commons.

Identity

SID310 is a Continental common-rail diesel controller in the SID family. Abrites lists it as "Continental SID310 TC1791", indicating an Infineon TriCore TC1791 processor, and AutoTuner's compatibility list (28 October 2026) gives the same processor. That differs from the TC1767 listed for SID307 and the TC1782 listed for Bosch EDC17C84, so the three controllers are not interchangeable. Abrites compatibility list; AutoTuner compatibility PDF.SID310 is a Continental common-rail diesel controller in the SID family. Abrites lists it as "Continental SID310 TC1791", indicating an Infineon TriCore TC1791 processor. That differs from the TC1767 listed for SID307 and the TC1782 listed for Bosch EDC17C84, so the three controllers are not interchangeable. Abrites compatibility list.

Applications

SID310 is not limited to the K9K. Alientech's 2021 driver update lists it across several Renault–Nissan and Mercedes-Benz diesels:

EngineVehicles listed1.5 dCi, 110 PSRenault Clio IV, Mégane IV and Kadjar; Nissan Qashqai1.5 diesel, 115 PSMercedes-Benz A-Class W176 180d; Infiniti Q30 1500d2.3 dCi, 130 PSRenault Master2.3 dCi, 160 PSNissan Navara

Abrites also lists SID310 on the Renault Grand Scénic 1.5 dCi of 2016 and 2017. AutoTuner adds the Renault 1.5 dCi at 90 PS and the 1.6 dCi at 130 PS. Each source records tool coverage, not a factory build list; the engine suffix is not given. The Abrites programming tool manual lists SID310 for Dacia, Infiniti, Opel and Mercedes-Benz.Abrites also lists SID310 on the Renault Grand Scénic 1.5 dCi of 2016 and 2017. AutoTuner adds the Renault 1.5 dCi at 90 PS and the 1.6 dCi at 130 PS. Each source records tool coverage, not a factory build list; the engine suffix is not given.

Tool access

AutoTuner's 2017 release supports SID310 on the bench in boot mode first. Once an OBD patch has been applied through boot, the controller can be read and written over OBD; reading took about 16 seconds and writing about 40 seconds in AutoTuner's figures. Alientech added SID310 support to ECM Titanium in July 2021. Tool support changes between versions, so check the current documentation for the exact vehicle and software.

Identification limits

The same models appear with other controllers in other years and markets: the Sandero with Bosch EDC17C84, and the Mégane III and Scénic III with SID305 or SID307. Read the ECU label and its hardware and software identification before choosing a file or procedure. A SID310 file, checksum method or injector procedure does not transfer to another SID number.

Connector pinoutThe Abrites programming tool manual (section 8, page 135) contains a boot-mode connection diagram for SID310 that marks, on a three-connector ECU face, the cavities used for bench wiring. It is a tool vendor's bench-wiring illustration rather than a full connector pinout.

Related pages

Renault K9K 1.5 dCi tuning guideRenault M9T 2.3 dCi tuning guideContinental SID301Continental SID305Continental SID307Renault K9K 1.5 dCi tuning guideContinental SID301Continental SID305Continental SID307

Sources

Abrites, ECU compatibility list, Renault Grand Scénic 1.5 dCi entries. Accessed 19 November 2026; page numbers may shift.Alientech ECM Titanium driver update for Continental SID310 and SID307, 13 July 2021, as republished by a tool reseller. Accessed 19 November 2026.AutoTuner, Renault 1.5 dCi – 1.6 dCi – Continental SID310, 22 August 2017. Accessed 19 November 2026.Abrites, ECU programming tool user manual, 2026, section 8 "ECU Connections - PIN OUT Diagrams and Boot". SID310 TC1791 listing and boot-connection diagram. Accessed 19 November 2026.AutoTuner ECU compatibility list, export dated 28 October 2026. Tool-vendor MCU listing (TC1791). Accessed 19 November 2026.Abrites, ECU compatibility list, Renault Grand Scénic 1.5 dCi entries. Accessed 19 November 2026; page numbers may shift.Alientech ECM Titanium driver update for Continental SID310 and SID307, 13 July 2021, as republished by a tool reseller. Accessed 19 November 2026.AutoTuner, Renault 1.5 dCi – 1.6 dCi – Continental SID310, 22 August 2017. Accessed 19 November 2026.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: Continental SID310

Identity

SID310 is a Continental common-rail diesel controller in the SID family. Abrites lists it as "Continental SID310 TC1791", indicating an Infineon TriCore TC1791 processor. That differs from the TC1767 listed for SID307 and the TC1782 listed for Bosch EDC17C84, so the three controllers are not interchangeable. Abrites compatibility list.

Applications

SID310 is not limited to the K9K. Alientech's 2021 driver update lists it across several Renault–Nissan and Mercedes-Benz diesels:

EngineVehicles listed
1.5 dCi, 110 PSRenault Clio IV, Mégane IV and Kadjar; Nissan Qashqai
1.5 diesel, 115 PSMercedes-Benz A-Class W176 180d; Infiniti Q30 1500d
2.3 dCi, 130 PSRenault Master
2.3 dCi, 160 PSNissan Navara

Abrites also lists SID310 on the Renault Grand Scénic 1.5 dCi of 2016 and 2017. AutoTuner adds the Renault 1.5 dCi at 90 PS and the 1.6 dCi at 130 PS. Each source records tool coverage, not a factory build list; the engine suffix is not given.

Tool access

AutoTuner's 2017 release supports SID310 on the bench in boot mode first. Once an OBD patch has been applied through boot, the controller can be read and written over OBD; reading took about 16 seconds and writing about 40 seconds in AutoTuner's figures. Alientech added SID310 support to ECM Titanium in July 2021. Tool support changes between versions, so check the current documentation for the exact vehicle and software.

Identification limits

The same models appear with other controllers in other years and markets: the Sandero with Bosch EDC17C84, and the Mégane III and Scénic III with SID305 or SID307. Read the ECU label and its hardware and software identification before choosing a file or procedure. A SID310 file, checksum method or injector procedure does not transfer to another SID number.

Related pages

Sources

Revision 5: Continental SID310
K9K 1.5 dCi 90 engine in a Renault Clio IV
K9K 1.5 dCi 90 engine in a Renault Clio IV. The Clio IV 1.5 dCi is tool-listed with SID310; the controller is not visible in the photograph. Image: Arnaud FRANOUX, CC BY-SA 4.0, via Wikimedia Commons.

Identity

SID310 is a Continental common-rail diesel controller in the SID family. Abrites lists it as "Continental SID310 TC1791", indicating an Infineon TriCore TC1791 processor, and AutoTuner's compatibility list (28 October 2026) gives the same processor. That differs from the TC1767 listed for SID307 and the TC1782 listed for Bosch EDC17C84, so the three controllers are not interchangeable. Abrites compatibility list; AutoTuner compatibility PDF.

Applications

SID310 is not limited to the K9K. Alientech's 2021 driver update lists it across several Renault–Nissan and Mercedes-Benz diesels:

EngineVehicles listed
1.5 dCi, 110 PSRenault Clio IV, Mégane IV and Kadjar; Nissan Qashqai
1.5 diesel, 115 PSMercedes-Benz A-Class W176 180d; Infiniti Q30 1500d
2.3 dCi, 130 PSRenault Master
2.3 dCi, 160 PSNissan Navara

Abrites also lists SID310 on the Renault Grand Scénic 1.5 dCi of 2016 and 2017. AutoTuner adds the Renault 1.5 dCi at 90 PS and the 1.6 dCi at 130 PS. Each source records tool coverage, not a factory build list; the engine suffix is not given. The Abrites programming tool manual lists SID310 for Dacia, Infiniti, Opel and Mercedes-Benz.

Tool access

AutoTuner's 2017 release supports SID310 on the bench in boot mode first. Once an OBD patch has been applied through boot, the controller can be read and written over OBD; reading took about 16 seconds and writing about 40 seconds in AutoTuner's figures. Alientech added SID310 support to ECM Titanium in July 2021. Tool support changes between versions, so check the current documentation for the exact vehicle and software.

Identification limits

The same models appear with other controllers in other years and markets: the Sandero with Bosch EDC17C84, and the Mégane III and Scénic III with SID305 or SID307. Read the ECU label and its hardware and software identification before choosing a file or procedure. A SID310 file, checksum method or injector procedure does not transfer to another SID number.

Connector pinout

The Abrites programming tool manual (section 8, page 135) contains a boot-mode connection diagram for SID310 that marks, on a three-connector ECU face, the cavities used for bench wiring. It is a tool vendor's bench-wiring illustration rather than a full connector pinout.

Related pages

Sources