Volkswagen Group PD modified cars
Documented modified vehicles using VW Group 1.9 TDI PD engines, including Volkswagen, SEAT and Škoda chassis. The figures below are reported by the builder or owner; the source does not always establish dyno corrections or wheel-versus-crank basis. See big power 1.9 TDI PD engine builds for the complete illustrated specifications, sources and tuning context.
VW Golf Mk5 BKC: 260 bhp
An owner reports 260 bhp and 425 lb ft with a GTB2260VK, Firad +80% injectors, intercooler, custom calibration and 02Q six-speed with Quaife differential. The dyno sheet and bottom-end specification are not established by the post. Owner build thread.
VW Bora ASZ: 326 bhp diesel-only / 449 bhp with nitrous

Darkside lists a GTD2872VRK hybrid, +160% injectors, ported head, race cam, H-beam rods, machined BHW pistons and FASS lift pump. The 449 bhp figure is nitrous-assisted. Builder's project and photo gallery. Image credit: Darkside Developments; reproduced with user-stated permission. Image shows a build stage.
VW Golf Mk4 ARL 4Motion: 368.6 bhp without nitrous / 426.7 bhp with nitrous

The builder lists compound GTB1749V and Holset HX35W turbos, +120% injectors, Rosten rods, BHW pistons and two-stage intercooling, with modified 4Motion drivetrain. Builder's project and photo gallery. Image credit: Darkside Developments; reproduced with user-stated permission. Image may show an earlier build stage.
VW Golf Mk4 ARL: owner-reported 300+ hp

Its owner lists Firad +80% nozzles, a water-cooled ball-bearing turbo, front-mount intercooler and rebuilt DRW six-speed; the 300+ hp and 384 lb ft figures are owner-reported, and two different turbo model numbers appear in the listing. Owner's historical listing. Photo from that listing; photographer not specified. Reproduced with user-stated permission.
VW Corrado PD130 swap: estimated 450 hp

The VAGbuilders Corrado uses a 1.9 PD130 with forged rods, ported head, 272 cam specification, Skillaturbo 2971, water-to-air intercooler and 4Motion. The 450 hp is a builder estimate, not an independently verified dyno figure; injector specification and assistance are not stated. Engine Swap Depot feature and photographs; feature credits VAGbuilders and Officially Gassed, photographer unspecified. Reproduced with user-stated permission.
S-Tune Golf Mk4 ARL: 343 bhp

Photo: S-Tune project gallery; photographer not specified. Reproduced with user-stated permission.
Builder-reported: 343 bhp and 651 Nm. The 2025 project identifies a 1.9 PD150 ARL, GTB2872bb turbo, Firad 120% injectors, 272 camshaft, custom intercooler and remap, PD150 head bolts, and Sachs SRE paddle clutch. A Snow Performance methanol-injection system is listed; the project does not say whether it was operating for the quoted figure. S-Tune describes a full engine and gearbox build and nitrous as future plans, not proven features of this recorded configuration. Dyno method and measurement basis are not specified. S-Tune build specification.
AR Performance Golf Mk4: 449 bhp diesel / 590 bhp with nitrous

Photo: AR Performance customer builds gallery; photographer not specified. Reproduced with user-stated permission; photographs can represent a different build stage.
Builder-reported: 449 bhp on diesel, 828 Nm, and 590 bhp with nitrous. AR Performance describes its Mk4 Anniversary demo as a built 1.9 TDI with machined ARL pistons, Pro Race Engineering rods, ported head, 272° dBilas cam, Firad 120% injectors, ceramic-coated custom GTD30 turbo, S3 intercooler, Sachs SRE paddle clutch, custom calibration and a two-stage ZEX nitrous kit. The builder labels the 449 bhp result diesel-only with no additives; it does not clearly specify which run produced 828 Nm, the original engine code, or the measurement basis. These reported numbers have not been independently verified. AR Performance project specification.
More VW Group PD builds
The illustrated build reference also covers Ibiza ATD and ASZ, an Ibiza BLT drag car, and a Fabia ASZ, with their reported power figures and components. Follow PD injector and nozzle identification for part-number and calibration context.