Applicability
This guide concerns documented VAG Bosch EDC16 applications with solenoid unit injectors, including selected U1, U31 and U34 examples in AutoTuner's coverage announcement. Establish the injection hardware and exact software first using identification and transmission checks. Siemens piezo-PD/PPD and common-rail systems require their own definitions and delivery models.
Pressure generation, delivery and BIP
A solenoid unit injector combines the pump and nozzle at the cylinder. Cam-driven pumping and valve operation determine delivery; it has no common-rail pressure setpoint. Bosch's unit-injector operating-principle description explains this general mechanism, but its present large-engine product ratings are not VAG passenger-car specifications.
Bosch defines BIP as the solenoid closing point: pressure then builds and nozzle injection follows when opening pressure is reached. It calls the interval from start of delivery to the end of solenoid triggering the delivery period. Thus electrical actuation, delivery and hydraulic nozzle injection are related events, not interchangeable labels. Bosch, Electronic Diesel Control EDC, 2001, printed page 56.
VW's V10 EDC16 example detects the valve-closing feature in solenoid current and uses it to correct subsequent actuation. This establishes the feedback principle in that example; it does not prove that a diagnostic quantity is directly measured fuel mass or establish every four-cylinder map selector. VW of America SSP 89P303, printed pages 8–9.
What to establish before changing a duration map
- Definition: record the map identifier, binary address, dimensions, data type, byte order, signedness, factors, offsets and units. Establish what each input and output represents from a matching definition or a traced function.
- Selection: identify which table is active in the intended operating mode. Numbered or visually similar tables are not proof of a universal duration-map sequence. Record any selectors or corrections that remain unverified.
- Quantity basis: distinguish fuel mass from volume, per-cylinder cycle from engine-total flow, and one injection event from a sum of events. Do not silently equate mg/stroke with mm³/stroke.
- Range: trace the requested quantity through the active torque/quantity conversion, limits, timing, delivery and air-control lookups. Determine how this software handles endpoints; a nearby map or a larger axis value does not prove usable delivery beyond the characterised range.
EVC documents map-data organisation, axis sources and display conversion separately. Changing an editor's factor/offset or a user-supplied axis description is different from changing calibration bytes used by the ECU. Verify the exported binary and actual axis storage. EVC WinOLS 5.94 manual, map properties, printed pages 149–151.
Crank-angle and time arithmetic
For a duration genuinely expressed in crankshaft degrees at steady speed n rpm:
crank degrees per millisecond = 0.006 × nduration in milliseconds = crank degrees / (0.006 × n)
Invented arithmetic example: 24 crank degrees take 2 ms at 2,000 rpm and 1 ms at 4,000 rpm. This illustrates units only; it supplies no recommended duration. Confirm whether the map actually uses crank degrees, time or another representation before applying the formula.
For an angle calculation, first express start and end using the same origin, sign and event reference. If positive means after TDC, a hypothetical start of −10° and a 24° duration give an end at +14°. That addition describes the selected interval only. Adding an electrical actuation duration to a hydraulic start-of-injection value does not establish nozzle end of injection, and neither number specifies combustion phasing.
Axis extension is not injector characterisation
Reported discussion: a reply in the 2014 BKD 03G906016HM NefMoto thread recommends extending duration-map quantity range before requesting more fuel. The useful question is whether every active lookup covers the intended operating point. The reply provides no verified injector delivery data or universal extrapolation method.
Calibration implication: merely renaming an endpoint leaves the associated duration attached to a different stated quantity; it does not demonstrate that the injector delivers that quantity. If injectors/nozzles change, establish the corresponding delivery characteristic and validate operation. A plausible logged IQ can still reflect the ECU's model. Keep the torque model consistent with delivery, and use measured output and suitable instrumentation to assess the result. There is no safe universal SOI, EOI or percentage duration increase established by these sources.
Separate mechanical timing checks from injection-map changes
Ross-Tech explicitly limits its TDI Timing Checker to VE engines; the graph is not for PD or common rail. Follow the exact engine's mechanical timing and diagnostic procedure. Do not apply a VE graph, or assume a cam/crank synchronisation reading is the same signal as commanded injection timing. Ross-Tech: TDI Timing Checker applicability.
Use EDC16 logging and torque diagnosis to separate requests, limits, estimated delivery and feedback during validation.
Injector changes and warm-up idle: a U31 report
Reported case, 2015: the NefMoto EDC16U31 PD100 discussion describes a reported 2004 Golf 1.9 TDI fitted with injectors called “PD150”. The poster reported a low displayed idle quantity during warm-up, with stable hot idle and normal driving. A reply suggested donor duration maps and possibly timing; the poster said this had already been done. The reviewed thread does not establish a confirmed fix, exact injector parts, engine code or complete ECU software identity.
VW's V10 EDC16 example controls idle speed by adjusting fuel to match the target, taking coolant temperature and additional loads into account. Its smooth-running control also responds to unequal cylinder contribution, with compression, friction and injector hydraulics among the described influences. This is a control-principle reference, not a four-cylinder calibration definition. VW of America SSP 89P303, printed pages 16–18.
Diagnostic use: compare requested/actual idle speed and running quality throughout warm-up, with coolant/fuel temperature, available quantity and cylinder-correction values, timing/actuation state and accessory loads. Identify the fitted injector parts and the exact active characteristics/corrections in the software. A low displayed IQ alone does not prove under-delivery or identify a faulty injector; a calm hot idle does not validate the warm-up model. Avoid changing a map merely to make the display match a familiar stock number. The case does not establish that copying an unspecified “PD150” map set completes an injector conversion.
PD injector identification and engine applications
These selected source-listed applications are not an exhaustive factory fitment or a swap chart. Match the complete VAG and Bosch numbers, vehicle VIN, market, production date and emissions specification against the current parts catalogue. A shared engine code, remanufactured exchange listing or similar suffix does not prove identical original hardware, flow or calibration. Distinguish 070 130 073 N from 07Z 130 073 N. The comparative hardware list includes engines with EDC15 and Siemens PPD as well as Bosch EDC16; it does not imply that all use the same controller.
1.2, 1.4 and 1.9 PD applications
- 045 130 073 AA; Bosch 0 414 720 034 / 084: 1.2 TDI ANY and AYZ in the cited Audi A2 and VW Lupo 3L listings. Pawlik Diesel Service. Other supplier exchange listings also group 045 130 073 J / P / Q, Bosch 0 414 720 030 / 031 and exchange 0 986 441 555, for specified ANY / AYZ vehicles. One specialist assigns P to 030 and Q to 031; a second lists them together. Pawlik lists 045 130 073 J / Bosch 0 414 720 016 for specified ANY A2 and Lupo vehicles, but also uses 016 in an AA listing, so the original OE pairing remains uncertain. J listing; AA listing. Verify the stamped part and VIN; exchange-group membership alone does not prove identical original specification. Gładysek list; InjektorExpress.
- 045 130 073 AB / F, 045 130 079 AX; Bosch 0 414 720 009 / 033 / 083, exchange 0 986 441 552: 1.2 ANY in the Rabotti EUI list; a separate supplier also identifies AB with ANY. A Lupo supplier catalogue also groups ANY and AYZ with AB, F and 079 AX. This is a separate exchange listing from AA above: confirm the installed part and vehicle specification. Injector listing; Lupo supplier catalogue.
- 045 130 073 D; Bosch 0 414 720 012: a diesel specialist lists this number for the 1.2 TDI ANY Lupo. The available cross-reference sources differ about Bosch numbers, so treat this as a catalogue lead and check the part stamped on the vehicle and the VIN-specific catalogue before ordering. Gładysek application list; alternative Bosch-number list.
- 045 130 073 B / C / T, 045 130 079 X; Bosch 0 414 720 035: 1.4 AMF and BAY in a Polo application listing. Another listing also identifies 038 130 073, D, F and L with the exchange family and lists 1.9 AJM and AUY. A Passat listing separately identifies AJM / ATJ in its stated 1998–2000 application. Passat AJM / ATJ listing. Verify each vehicle and number rather than assuming identical original specification. Polo listing; Tip-Tec.
- 038 130 073 F / Bosch 0 414 720 007: a breaker records this pair on a Golf IV 1.9 AJM; a parts catalogue also lists it for specified A4 AJM / ATJ and Golf AJM / AUY applications. AJM donor record; parts catalogue.
- 038 130 073 L / Bosch 0 414 720 022: a diesel specialist lists this combination in applications including 1.4 AMF and 1.9 AJM / ATJ. The same source groups additional vehicles and codes; check the fitted unit and vehicle-specific catalogue. Gładysek application list.
- 038 130 073 T; Bosch 0 414 720 035: a diesel specialist lists this combination for specified 1.9 AJM / ATJ vehicles. Its page also contains an inconsistent 038 130 075 T variant, so treat the OE number as a lead and verify the stamping and vehicle catalogue; distinguish it from 045 130 073 T. Pawlik listing; AJM listing.
- 038 130 073 BM / BP; Bosch 0 414 720 304 / 314 / 364, exchange 0 986 441 577: 1.4 BNM, BNV, BMS and BWB in specified applications; BRB and BVK are listed 1.9 applications. PF Jones Roomster listing; Darkside applications.
- 038 130 073 AH / H / N; Bosch 0 414 720 036 / 086, exchange 0 986 441 553: 1.9 ANU in the listed Galaxy, Alhambra and Sharan applications; Ford cross-references include XM21-9A543-AB and 1206322. A 2000 Sharan ANU donor record pairs 038 130 073 H / Bosch 0 414 720 014; an Alhambra ANU exchange listing also groups 0 414 720 024 with H, N and AH. These are documented examples, not proof of a universal substitution. Sharan donor record; Alhambra exchange listing. Common Rail Diesels; Alhambra parts catalogue.
- 038 130 073 A; Bosch 0 414 720 008: a specialist lists 1.9 ANU Galaxy, Alhambra and Sharan applications. Another supplier groups this with H / AH exchange references. This does not establish a vehicle-independent substitution; verify the exact VIN and part. Gładysek application list; supplier cross-reference.
- 038 130 073 AK / AC / AD; Bosch 0 414 720 023 / 029 / 038, exchange 0 986 441 554: 1.9 AUY in listed Sharan, Alhambra and Ford Galaxy applications. A supplier specifically groups AD with the 0 414 720 023 / 038 family for AUY. A repairer specifically pairs AC with Bosch 0 414 720 029 on the 1.9 AUY Sharan; a breaker also records those numbers on a 2001 AUY vehicle. Repairer AC application; donor record. Pawlik AUY listing. Ford references include YM21-9A543-BA / BB; supplier application conditions identify AUY even where a model heading also mentions BVK. Archer Diesel and its fitment conditions; cross-reference.
- 038 130 073 R; Bosch 0 414 720 018: a diesel specialist lists this in the 1.9 AUY Galaxy / Sharan / Alhambra exchange family. Cross-references do not prove that all AUY vehicles left the factory with the same unit. Pawlik AUY listing; Gładysek number list.
- 038 130 073 J / AJ / P, 038 130 079 C / CX; Bosch 0 414 720 015 / 025 / 037 / 087, exchange 0 986 441 556: 1.9 ATD and AVB in supplier-listed vehicles. A used-parts listing specifically pairs 038 130 073 AJ / Bosch 0 414 720 037 with a Passat B5.5 1.9 AVB. Passat AVB listing. A parts catalogue gives VIN limits for some J applications; confirm the exact vehicle. Tip-Tec cross-reference; J catalogue conditions. Darkside.
- 038 130 073 AG; Bosch 0 414 720 213 / 265, exchange 0 986 441 559: 1.9 AXR, BKC, AXB, AXC, BJB, BRU, BXF and AVQ; 1.4 BHC and BAY in specified supplier-listed vehicles. A breaker lists AG / Bosch 0 414 720 215 on a 2003 Golf IV AXR; a remanufacturer also lists Bosch 215 and AG / AQ for specified AXR and ATD vehicles. AXR donor listing; remanufacturer catalogue. The same seller groups AM and AQ with AG as replacement references; verify the fitted number for the individual vehicle. Parts catalogue; Darkside.
- 038 130 073 S: a Golf IV AXR remanufactured exchange listing groups this OE reference with 038 130 073 AG / AM / AQ, Bosch 0 414 720 115 / 206 / 208 / 213 / 215 / 265 and exchange references 038 130 079 D / DX / GX. The listing does not identify which original Bosch number was stamped on every S injector or prove identical delivery across the group. Confirm the fitted number and vehicle-specific parts catalogue. Golf IV AXR exchange listing; A3 AXR / BKC / BXE listing.
- 038 130 073 AQ; Bosch 0 414 720 213: a breaker records this combination on a 2002 VW Golf IV 1.9 AXR; a specialist separately lists it for that application. Match the fitted part because AXR also appears in other families. Donor-vehicle record; Pawlik AXR listing.
- 038 130 073 AM; Bosch 0 414 720 208: a repairer lists this unit for specified 1.9 ATD, BLS, AXR, AXB and AVQ vehicles. This is a supplier application list, not proof of the factory part for each vehicle. Repairer listing; Gładysek number list.
- 038 130 073 BL / BN; Bosch 0 414 720 303 / 307 / 313 / 363, exchange 0 986 441 568: 1.9 BKC, BXE and BLS in specified vehicles. A remanufactured Seat Leon BLS listing groups these Bosch references with BL / BN and exchange 038 130 079 TX; verify the exact original rather than assuming all units have identical delivery. EcoDiesel BLS listing; PF Jones Passat BLS cross-reference. Another specialist lists BRM in the VW Jetta; supplier-listed BRR and BRS include Transporter applications. A specialist also lists BMT, BXJ and BSU, and 1.4 BNM / BNV in specified vehicles; these codes also appear in other injector listings, so match the original number. Gallardo application list. Darkside applications; Triplet Diesel BRM listing. Archer Diesel.
- 038 130 073 BA / BC / BE / AR / AN / Q: A grouped seller listing includes 1.9 AWX, AVF, BLT, ASZ in the Sharan/Alhambra, and AVB; also 1.4 ATL. The grouped list does not identify each original suffix for each engine. Darkside grouped listing.
- 038 130 073 BA / Bosch 0 414 720 216: a breaker records this pair on a 2006 Seat Ibiza 1.9 BLT; a supplier also lists specified AWX, AVF, ASZ, BTB and BLT applications. These are listing or donor records, not proof that every engine with that code has the same original injector. BLT donor record; supplier application list.
- 038 130 073 Q; Bosch 0 414 720 204: Merlin Diesel lists the Audi A2 1.4 TDI ATL, November 2003–August 2005, and specified Audi A4 AWX / AVF applications. Its listing groups other OE references; it does not prove that every reference was original equipment on every listed engine. Another specialist pairs Q with Bosch 0 414 720 019 in a grouped ATL / AWX / AVF application list, while Pawlik lists Q / 0 414 720 201 for specified AWX vehicles. Check the original injector and catalogue conditions. Gładysek list; Pawlik AWX listing. Merlin Diesel application list.
- 038 130 073 AN; Bosch 0 414 720 209: a breaker records this combination on a 2001 Audi A4 with 1.9 AWX. This is an observed donor-vehicle listing, not proof of original configuration for every AWX. Donor-vehicle record.
- 038 130 073 AR; Bosch 0 414 720 214: a breaker records this combination on a 2001 VW Passat 1.9 AVF. An exchange reference can be different from the stamped number, so compare both. Donor-vehicle record.
- 038 130 073 AA; Bosch 0 414 720 028: an injector supplier lists the combination for selected 1.9 ASZ / BPX applications. It is also part of the AL exchange family discussed below; the listing does not establish identical original delivery. Injector Marketing listing; ASZ donor listing.
- 038 130 073 BE; Bosch 0 414 720 231: 1.9 BTB in a 2005–2006 Galaxy 110 kW listing, with Alhambra BTB also listed by the specialist. Pawlik Galaxy listing; Alhambra listing.
- 038 130 073 G / Bosch 0 414 720 013; 038 130 073 AB / Bosch 0 414 720 021: a diesel specialist associates each pair with listed 1.9 ASZ applications. Other engines appear in its grouped lists, including BPX and ARL, but this does not establish which injector was originally fitted to every vehicle. A second supplier groups G, AB and both Bosch numbers for a Polo ASZ exchange application. Check the fitted part and VIN. Gładysek application list; Ribble Valley ASZ exchange listing.
- 038 130 073 AL; Bosch 0 414 720 039, exchange 0 986 441 557: 1.9 ASZ PD130 and ARL PD150 in supplier-listed vehicles; PF Jones also lists the 1.9 BPX Ibiza application for Bosch 0 414 720 039 / VAG AL. PF Jones Ibiza applications. The supplier says use as an upgrade on some PD100/105/115 engines requires custom mapping. Bosch exchange data groups AL with AA, AB and G while the supplier describes an upgrade for those numbers; this is not proof of identical original delivery. Darkside; Bosch exchange cross-reference.
- 038 130 073 BF / 038 130 079 NX; Bosch 0 414 720 223 / 273, exchange 0 986 441 570: 1.9 BEW; Triplet Diesel also lists BSW in specified Beetle applications. The AG supplier lists BEW in other applications, so confirm the actual part and VIN. Rabotti EUI list; Triplet Diesel.
- 038 130 073 BD / 038 130 080 CX; Bosch 0 414 720 226 / 276, exchange 0 986 441 571: 1.9 BKE in the cited Audi A4 B6 application. BH is separately listed for BKE; do not infer interchangeability from the common engine code. Pawlik listing; Turbo Speed.
- 038 130 073 BH; Bosch 0 414 720 230 / 280, exchange 0 986 441 575: 1.9 BKE in a listed Audi application; Darwen also lists Skoda Superb BSV (10/2005–05/2007) and BPZ (01/2007–03/2008). Darwen application list. Euro Car Parts Australia.
2.0 PD and PPD applications
- 038 130 073 AP / 038 130 079 HX; Bosch 0 414 720 221 / 271, exchange 0 986 441 562: 2.0 SDI BDJ in VW Caddy applications. Some catalogues group BST with BDJ, but individual listings also associate BST with AS / BR; check the stamped part and exact application rather than treating them as proven interchangeable. Common Rail Diesels BDJ; Archer grouped BDJ/BST listing.
- 038 130 073 AS / BR, 038 130 080 BX; Bosch 0 414 720 224 / 232 / 282, exchange 0 986 441 564: 2.0 SDI BDK Golf; a specialist also lists BR with BST Caddy. These are SDI examples, not an assertion that a turbocharged 2.0 TDI uses the same unit. PF Jones BDK; BST listing.
- 038 130 073 BK / BQ; Bosch 0 414 720 302 / 306 / 312 / 362, exchange 0 986 441 567: 2.0 eight-valve BMM and BMP in the Rabotti unit-injector list; see also the vehicle applications.
- 038 130 073 BC; Bosch 0 414 720 222 / 272, exchange 0 986 441 569: 2.0 BGW Passat. The earlier grouped BA/BC entry does not make every listed number a direct replacement in every vehicle. Turbo Speed; Rabotti.
- 038 130 073 BB; Bosch 0 414 720 227: 2.0 BHW Passat, in the North American-market application listed. Some sellers also list BC for BHW; check the original injector and market-specific catalogue. Pawlik Diesel Service; contrasting BC listing.
- 038 130 073 BJ; Bosch 0 414 720 229 / 279: 2.0 BPW, BRC, BRT, BSS, BWW and BVH in the vehicles identified by the supplier; also 1.9 BUK. Darwen Diesels application list.
- 03G 130 073 B / BX; Bosch 0 414 720 401 / 402 / 403 / 453, exchange 0 986 441 580: early 2.0 16v AZV and BKD; PF Jones lists 453 as a replacement and 580 as the exchange number for this group. For its Audi A3 8P1 AZV and BKD entries, K Motorshop specifies production through 03/2004 and VIN up to 8P..4..160 000; other models have different conditions. K Motorshop fitment conditions. PF Jones cross-reference. Darkside early injector.
- 03G 130 073 G / GX; Bosch 0 414 720 404 / 454, exchange 0 986 441 566: later AZV and BKD, plus supplier-listed BVG, BVF, BRF, BNA, BRE and BLB. Rabotti also lists BSY; a specialist associates the cross-reference Mitsubishi MN980235 with a 2.0 DI-D BSY Outlander. These are catalogue matches subject to the exact vehicle, not a claim that all Mitsubishi 2.0 diesels use PD. Rabotti EUI list; Pawlik BSY listing. The supplier says G cannot be used in engines originally fitted with B. Darkside later injector.
- 03G 130 073 D / S / SX; Siemens piezo PPD: a VW 23H9 campaign document lists exchange SX for BMA, BKP, BVE and BWV in its covered vehicles, and identifies D among elements to inspect and replace under the campaign. A breaker records 03G 130 073 S on a 2006 Passat BKP; a supplier groups S with D and SX, while the campaign specifies SX for its covered BKP vehicles. The donor record does not establish its replacement history. BKP donor record; Archer grouped listing. The campaign is vehicle-specific: check VIN and current VW service status. VW campaign 23H9 document; Kaufmann cross-reference.
- 03G 130 073 M / MX / T / TX; Siemens piezo PPD: supplier lists BMN, BRD, BMR, BVA, BUZ and BUY in specified vehicles. The VW 23H9 campaign lists TX for BMR, BUZ and BMN and identifies M for inspection and replacement in its covered vehicles. This is a separate hardware and calibration family from Bosch solenoid PD. Darkside; VW campaign document.
2.5 five-cylinder and 5.0 V10 PD applications
- 07Z 130 073 D / F / FX; Bosch 0 414 720 210 / 260, exchange 0 986 441 561: 2.5 AXD, AXE, BLJ, BAC, BLK and 5.0 AYH in supplier listings. VIN limits apply: one Touareg catalogue lists F for AYH up to VIN 7L-3-020 000; AXE/BLJ and BAC/BLK also have listed production splits. Darkside; K Motorshop conditions.
- 070 130 073 N / NX; Bosch 0 414 720 228 / 278, exchange 0 986 441 573: 2.5 AXE and BLJ after listed T5 VIN breaks; BAC and BLK after a Touareg VIN break. The same catalogue lists BPE and BPD in specified later Touareg applications. Darkside groups Bosch 278 with 228 and lists these engine codes. Darkside cross-reference. K Motorshop conditions.
- 070 130 073 R / RX; Bosch 0 414 720 310 / 360, exchange 0 986 441 579: 2.5 BNZ. Rabotti; Gallardo Parts.
- 07Z 130 073 N / NX; Bosch 0 414 720 309 / 359, exchange 0 986 441 578: 2.5 BPC and 5.0 R50 CBWA; one supplier also lists BPD and BPE. Other listings identify 070 N on some BPD/BPE applications, so check the individual VIN and original part. Rabotti; Darkside.
- 07Z 130 073 K / KX; Bosch 0 414 720 225 / 275, exchange 0 986 441 563: 5.0 V10 BKW in the US-market Touareg catalogue, including its listed Tier 1 emissions configuration. US-market parts catalogue; Dieselservice Stokking cross-reference; Bosch 275 listing.
- 07Z 130 073 G; Bosch 0 414 720 217: Listed with 07Z 130 073 H / HX and exchange 0 986 441 565 for the 5.0 AJS Phaeton. The cross-reference is a supplier exchange listing, not proof of identical original specification or unrestricted substitution. Phaeton listing.
- 07Z 130 073 H / HX; Bosch 0 414 720 220 / 270, exchange 0 986 441 565: 5.0 AYH and AJS; a 2004 Phaeton AJS donor record pairs H with Bosch 0 414 720 220. Phaeton donor record. A Touareg catalogue specifies AYH from VIN 7L-4-000 001 in its stated market and emissions configuration. Touareg catalogue; Diesel Talk.
- 07Z 130 073 T / TX; Bosch 0 414 720 311 / 361, exchange 0 986 441 576: 5.0 BLE and BWF; a catalogue identifies T/TX for the specified BLE EU4 DPF configuration. S/SX also appear in that catalogue; verify individually. A separate specialist lists 07Z 130 073 S / Bosch 0 414 720 305 for a 2004–2006 Touareg BLE application. Pawlik S application. Rabotti; Touareg catalogue.
Seller vehicle headings can aggregate multiple engine codes while detailed conditions narrow applicability. The 2.5 designation also covers older distributor-pump and later common-rail engines; identify the actual system first. If injectors or nozzles change, establish their delivery characteristics and software-specific correction requirements and validate the result; these references do not provide a universal flow rating or tuning values. See dual-ECU diagnosis for the V10.
PD nozzle identification and tuning
The nozzle is a component of the complete unit injector, and a nozzle part number, service kit and complete injector number identify different things. The following are catalogue examples for Bosch solenoid PD; confirm the complete injector number and revision with the nozzle supplier and the applicable Bosch test plan. They are not fitment claims for all engines sharing the code. Firad unit-injector nozzle catalogue.
- Firad ASLA150P783: a nozzle supplier lists this for 038 130 073 F / Bosch 0 414 720 007 and identifies AJM / AMF / ATJ / AUY among the applications. See the AJM donor example above; these are supplier-listed applications and require injector-specific verification. P783 nozzle listing.
- Wuzetem PDSLA150P800/ / Firad ASLA150P800/: a specialist lists PDSLA150P800/ for 0 414 720 015 / 037 and 1.9 ATD, identifying ASLA150P800/ as an alternate reference. The complete injector examples above include the J / AJ family. P800 nozzle listing.
- Firad ASLA150P1043: Firad lists several 1.9 TDI vehicle families; a specialist identifies Bosch units 0 414 720 013 / 028 / 039 and selected ASZ / ARL / BPX applications. Check the exact injector before ordering. Nozzle specialist.
- Firad ASLA150P1045: the Firad catalogue specifically references VW 038 130 073 R; a specialist also lists R / AC / AK in specified 1.9 AUY applications. AUY nozzle listing.
- Firad ASLA150P1247 / Wuzetem PDSLA150P1247: the Firad catalogue identifies 1.9 AXR; a separate nozzle supplier lists Bosch 0 414 720 206 / 208 / 213 / 215 and 1.9 AXR / BKC / BXE among its grouped applications. Match the actual injector, because that list does not establish the original part for every vehicle. P1247 application list.
- Wuzetem PDSLA150P1248: a supplier lists this nozzle for Bosch 0 414 720 204 / 209 / 214 / 216 / 231 in selected 1.9 AWX / BTB applications, and also lists P1042 as a cross-reference. Bosch lists the same service-kit family for those injector numbers; that does not establish that P1042 and P1248 are identical designs or that complete injectors interchange. P1248 supplier listing; Bosch kit list.
- Firad ASLA150P1156: the catalogue covers specified 2.5 TDI vehicles and Touareg 2.5 / 5.0 TDI. A supplier cross-references 07Z 130 073 F / FX and Bosch 0 414 720 210 / 260 with listed AXD / AXE and other engines. These model-family listings do not establish fitment on every 2.5 or 5.0 injector. Nozzle supplier cross-reference.
- Wuzetem PDSLA150P1491 / DSLA150P1491: Wuzetem identifies Bosch 0 414 720 313 / 363 and exchange 0 986 441 568 for selected 1.9 applications. A separate supplier links the BN / BL family with BLS among other engine codes; check the exact injector. Wuzetem manufacturer catalogue; BLS injector listing.
- Wuzetem PDSLA150P1499 / DSLA150P1499: Wuzetem lists Bosch 0 414 720 121 / 306 / 312 and exchange 0 986 441 567 for selected 2.0 TDI vehicles. A supplier separately lists BMM / BMP with the BK / BQ injector family; this is a catalogue match rather than an engine-wide specification. Wuzetem manufacturer catalogue; supplier BMM / BMP listing.
- Wuzetem PDSLA150P1489 / DSLA150P1489: Wuzetem lists Bosch 0 414 720 229 / 279 and exchange 0 986 441 574; a nozzle supplier lists 038 130 073 BJ for selected 2.0 BPW applications. Wuzetem manufacturer catalogue; BPW nozzle listing.
- Wuzetem PDSLA148P1468 / DSLA148P1468: a specialist lists 070 130 073 N, Bosch 0 414 720 228 / 278 and selected 2.5 AXE / BLJ applications. Verify the VIN break and installed injector described in the 2.5 list above. 2.5 N nozzle cross-reference; Firad 2.5 catalogue.
- Wuzetem PDSLA150P1586 / Firad ASLA150P1586: Wuzetem lists Bosch 0 414 720 310 for 2.5 T5 applications. Darwen also lists 0 414 720 360 and specific 2006–2009 BNZ vehicles; the injector reference above is 070 130 073 R / RX. Wuzetem manufacturer catalogue; Darwen BNZ application list.
- Wuzetem PDSLA150P1585 / DSLA150P1585: Wuzetem lists Bosch 0 414 720 359 for specified 2.5 T5 and 5.0 Touareg applications. A separate catalogue associates the 07Z 130 073 N / NX injector family with BPC and CBWA; confirm the exact installed unit. Wuzetem manufacturer catalogue; injector applications.
- ASLA152P1287++ / PDSLA152P1287++: Firad lists a 03G 130 073 application; a separate Wuzetem listing identifies Bosch 0 414 720 401 / 402 / 403 / 404 and selected 2.0 AZV / BKD applications. Nozzle compatibility alone does not override the documented complete-injector B/G fitment distinction above. Wuzetem nozzle listing.
Aftermarket high-flow versions are sold with percentages such as +50% or +100%; suppliers may use different baselines and test conditions, so the label alone does not establish actual fuel delivery, a power target or a safe duration. For example, a seller lists a +120% 1287 variant for specific 401–404 units. A nozzle change alters the injector assembly: have it assembled and tested against the relevant test plan, record the bench results and assess the ECU calibration and the complete engine combination. Darwen high-flow example; Darkside size options.
Bosch nozzle-kit lookup
Bosch lists nozzle service kits by the complete unit-injector number: for example, it lists base kit 1 417 010 926 for Bosch 0 414 720 313, and 1 417 010 921 for 0 414 720 311 / 361. It also lists base kit 1 417 010 903 for 0 414 720 007 and 1 417 010 905 for 0 414 720 015 / 037 / 087. These are repair-kit references, not complete injectors, universal flow ratings or proof of interchangeability. Check the current Bosch service documentation and test plan for the exact unit. Bosch nozzle-kit information.
For documented 1.9 PD combinations around 250–450 bhp, see big power 1.9 TDI PD engine builds; the examples distinguish diesel-only and nitrous-assisted results.
Evidence and review status
Reviewed 16 November 2026. Bosch and VW publications establish hardware/control principles; EVC documents editor behaviour. The arithmetic is an explicit illustration, and the calibration checks are editorial guidance. The BKD and PD100 forum discussions were reviewed from indexed public text; direct retrieval was blocked and their attached files were not independently analysed. No map addresses, injector flow data or universal tuning targets are established here.