Delphi DCM 1.1
Delphi DCM 1.1: first-generation 16-bit Euro 3 diesel controller, named for the Renault K9 as well as Kia and Ford Lynx, with identification limits for early 1.5 dCi units.
Tuning Guides
Browse calibration and tuning guides for Delphi DCM 1.1. Check the ECU hardware, software and vehicle stated in each guide before applying it. Variant guides and shared family references are listed separately.
Start here
Guides for this ECU
-
Renault K9K 1.5 dCi tuning guide
K9K 1.5 dCi engine and ECU identification across Delphi, Continental SID and Bosch controllers, pre-tuning health checks, calibration areas, logging and validation, with source limits.
Applies to: Bosch EDC17C42Bosch EDC17C84Continental SID301Continental SID305Continental SID307Continental SID310Delphi DCM 1.1Delphi DCM 1.2Delphi DCM 3.4
Shared family guides
These guides apply at family level. Check their stated scope for your variant.
-
PSA HDi and BlueHDi diesel tuning guide
PSA diesel ECU identification, EDC15 and EDC16 tuning research, MD1CS003 torque and programming evidence.
Applies to: Bosch EDC16C34Bosch MD1CS003Delphi DCMSiemens SID
-
PSA ECU identification and tuning guide
Peugeot, Citroën and DS petrol and diesel ECU identification, tuning references and programming considerations.
Applies to: Bosch EDC16C34Bosch MD1CS003Bosch MED17.4Bosch MED17.4.2Bosch MG1CS032Delphi DCMSiemens SID
Contribute a guide
Share a documented workflow, calibration observation or test result. Include the ECU identifiers, tools, test conditions and sources so others can build on it.