Tuning Wiki

GS19.04 M-shift is a Bosch/ZF 6HP26 mechatronic controller described for selected Land Rover vehicles. It must be distinguished from the similarly designated E-shift version and identified by the actual part and software numbers.

ZF 6HP mechatronic and guide sleeve
Illustrative 6HP mechatronic assembly, not an identified Land Rover controller, from ZF Aftermarket service information 50324. Credit ZF Friedrichshafen AG; reproduced with user-confirmed permission.

Identification and compatibility

The Jaguar/Land Rover specialist Old Jaguar's identification list associates GS19.04 M-shift 6HP26 with Bosch 0260550008 and ZF 0501213727, and lists Land Rover L319, L320, L322 as examples. The list also includes Jaguar X150 and Ford applications. It is a specialist reference, not a guarantee that any vehicle or controller with a matching label can be exchanged without programming.

Record donor and recipient VIN, gearbox specification, engine, selector and software. The same specialist's TCM matching notes describe different early Land Rover and Jaguar software and CAN contexts; do not assume a Jaguar calibration will work on a Land Rover merely because the hardware number is shared. The related Jaguar GS19.04 E-shift example uses a different part-number listing.

Pinout status

A connector pinout directly tying this particular hardware number to a documented Land Rover wiring diagram was not verified in the sources reviewed. No pin functions are asserted here. A 16-way connector can have different assignments between applications and selector systems. Obtain the exact VIN-specific wiring diagram, connector identification and face orientation before connecting any power or programming equipment.

Programming and calibration

PCMflash lists a Jaguar/Land Rover module 81 for selected ZF 6HP26/28 TCMs and read, write and checksum, according to its manufacturer manual. The manual does not associate that protocol with every part number: confirm exact controller, vehicle, operation, licence and current requirements. Calibration editing is separate from reading and writing a file.

Magicmotorsport FLEX lists 6HP bench duplication in its duplicable unit list; that is not proof of a supported recalibration procedure for this precise module. Confirm supported recovery and preserve the original data before changing an actual vehicle.

See ZF 6HP gearbox types and controllers. Sources reviewed 17 November 2026.

Community fitting and diagnosis

A 2022 MHH Auto discussion describes a Range Rover owner reporting Bosch 0260550008 from the transmission and asking how to program a spare after drive was lost when hot. Replies suggest other possible mechanical causes, but the thread does not establish a completed repair or definitive diagnosis. Identify the actual vehicle and diagnose the transmission before assuming a replacement electronic module is the cure.

An independently illustrated 6HP26 teardown on FullFatRR shows removal of the connector sleeve and mechatronic and highlights the manual-selector connection. The author does not identify the electronic module as 0260550008; check the official procedure and actual module before refitting.

Continue the conversation

If this topic interests you, consider joining the following forums. They host material referenced in this article.