CP3 is a Bosch three-plunger radial common-rail high-pressure pump. Its metering unit controls fuel entering the pumping elements, while the rail, pressure sensor, pressure-control hardware and DDE work together to meet the requested pressure. Pump output depends on shaft speed, inlet conditions, pressure, temperature and wear: an advertised pump size or power rating does not determine installed fuel delivery. Bosch common-rail catalogue.
Identification: Record the complete Bosch 0 445 … number and the vehicle/VIN, engine, drive, mounting and metering valve. Similar CP3 family labels do not establish interchangeability. Verify rotation, mounting, drive coupling, inlet, return, electrical control and rail-pressure limits against the part-specific catalogue and installer. BMW identifies Bosch 0 445 010 194 as the CP3 16/3 pump for the US M57TU2 TOP, without establishing that all markets or engines have the same pump. BMW engineering information.
Design and variants
The eccentric-driven radial layout compresses diesel in three pumping elements. Depending on the exact version, a supply or gear pump may be integrated or a separate supply arrangement used. The suction-side metering unit meters fuel before compression; the common-rail system stores the compressed fuel for injection. The pump, regulator, sensor, injector and rail form a matched system: installing a different pump does not automatically change permitted rail pressure or injection quantity.
| Example type | Documented Bosch number | What the example establishes |
|---|---|---|
| CP3S3 R70 | 0 445 010 045; 0 445 010 126 | Bosch training lists both as BMW R70 types; application and fitment still require part-number checks. |
| CP3S3 R90 | 0 445 010 073 | Bosch training lists this BMW example as R90/30; do not assume all R90 versions have the same interfaces. |
| CP3S3 R95 | 0 445 010 074; 0 445 010 108 | BMW R95 examples in the training parts list; R95 is distinct from R90. |
| CP3S3 R110 | 0 445 010 043; 0 445 010 110 | Volvo examples, not evidence of direct M57 fitment. |
Examples from the Bosch CP3 training and parts list. Its suffixes and components vary even within one family. R70, R90 and R110 are identification designations, not a universal horsepower or pressure rating. CP3 R70 · CP3 R90.
Audi / Volkswagen R90 examples
Bosch's training list identifies Audi 0 445 010 090 and 0 445 010 125 as CR/CP3S3/R90/20-789S. A diesel specialist lists 0 445 010 125 for specified Audi A4 B7 3.0 TDI BKN and A6 C6 3.0 TDI BMK applications, among others. These are examples; verify the exact part number and vehicle, and do not assume an Audi pump directly fits an M57. Bosch training list; specialist application list; R90 guide.
Upgrades
Options include a verified larger-displacement single pump, a modified pump tested by a diesel specialist, or a second pump with a matching controller and drive. These are complete system changes: compare tested flow at relevant pressure and pump speed, inlet and return capacity, electrical metering, rail stability and mechanical fit. Injector capacity and injection duration remain separate limits. A second pump needs appropriate belt drive, brackets, high-pressure fittings, low-pressure supply and control strategy; see the Santjer M57 dual-pump example, whose fitment is limited to the stated North American 335d layout.
Diagnosis and installation
Log requested and actual rail pressure under repeatable load and look at associated fuel-metering and rail-pressure faults. Before condemning a pump, check low-pressure supply and filter, air entry, restrictions, electrical supply and metering control, injector return leakage and rail pressure-control components. A fall in rail pressure is a system symptom, not proof of a failed pump.
Common-rail fuel can remain at very high pressure after shutdown. Use the vehicle-specific depressurisation and clean-work procedures, approved high-pressure lines and specified tightening/replacement instructions. Never loosen a live high-pressure connection to find a leak or use hands to check for leaks. After a pump failure, assess contamination throughout the fuel system and follow the manufacturer's repair and cleaning plan.
See fuelling faults, common-rail supply pumps and the M57 twin-turbo guide.
For documented Volvo and Hyundai R110 part numbers, the Audi L110 distinction and conversion checks, see Bosch CP3 R110 high-pressure fuel pumps.