An anti-roll bar (also called a sway bar or stabiliser bar) links the suspension on the two sides of an axle through a torsion spring. It is one of the cheapest handling adjustments, and one of the easiest to get wrong. This page explains what it does and what it does not do. The spring and damper side is on coilover setup.
What the bar does
When both wheels on an axle move together, the bar rotates freely in its mounts and does nothing. When one wheel moves relative to the other, the bar twists and resists. That raises the suspension's roll stiffness, which reduces body roll in cornering without making the springs stiffer in vertical movement, so it helps preserve ride quality (Wikipedia: Anti-roll bar). A bar gets stiffer with a stiffer material and a larger bar radius, and less stiff as the lever arms get longer.
It does not change total load transfer
Adding roll stiffness reduces body lean, but does not change the steady-state lateral load transfer from the inside wheels to the outside. That depends on the height of the centre of gravity and the track width. What the bar changes is where the transfer happens, front or rear, and how quickly the body takes it up.
Balance: front against rear
The split of total roll stiffness between front and rear axles tunes understeer and oversteer. More front roll stiffness puts more of the load transfer on the front axle and increases understeer. More rear roll stiffness has the opposite effect and reduces understeer. The reason is tyre behaviour: a tyre's grip rises with load, but by less than the load increases, so the axle carrying the larger share of the transfer loses some total grip (see power, weight and traction on load sensitivity). A stiffer front bar tends toward understeer and a stiffer rear bar toward oversteer, though springs, tyres, alignment and the drive layout all contribute.
The costs
- Ride quality. The bar passes a bump on one wheel to the opposite wheel, which can give a side-to-side waddling feel on rough roads. This grows with bar diameter and stiffness.
- Inside wheel lift. Excessive roll stiffness can lift the inside wheel in hard cornering. Some front-wheel-drive cars use this deliberately, lifting a rear wheel to overload the opposite one and reduce understeer, but it is a design choice, not a general upgrade.
- Body control against comfort. Bar stiffness trades control against comfort and wheel independence. Racing bars are often adjustable, by changing the lever arm or turning a flat bar blade.
Fitting and checking
- Decide the aim: less roll, or a balance change. A balance change usually means changing one end only, and the car's present tendency should be known first.
- Change one thing at a time and record the change in feel, with the same tyres and tyre pressures.
- Check the bar mounts, bushes and drop links for wear and fouling, because worn parts cause noise and loose handling.
- Re-check alignment after other suspension work: coilover setup.
Springs, dampers, geometry and tyres all affect balance and cannot be separated from the bar, so a change to one often calls for a review of the others. Check the legal and insurance position for modified suspension with a qualified local provider, and use the component maker's fitting instructions.
Sources
- Anti-roll bar. Wikipedia. Function, roll stiffness, load transfer, front and rear balance, ride effects and limits. Accessed 2026-11-19.