Tuning Wiki

Overview

Browse articles · Open overview article

A flywheel is a rotating component attached to an engine's crankshaft. Its rotational inertia stores energy between combustion events and helps the crankshaft resist sudden changes in speed. In a manual transmission it also usually provides a friction surface and mounting points for the clutch. Many flywheels carry a starter ring gear; some designs also have a separate engine-speed sensor target. The details depend on the application. RAM Clutches: flywheels; Schaeffler: DMF technology and installation.

Comparison of crankshaft, single-mass flywheel and clutch with a dual-mass flywheel containing springs between its two masses
Representative manual-transmission layouts; actual components and damper locations vary. Original diagram prepared for Tuning Wiki, CC BY 4.0.

What a flywheel does

Combustion produces torque in pulses rather than as a perfectly even flow. A rotating mass helps smooth the resulting speed variation and supplies stored energy when load rises, such as when a clutch is engaged. A dual-mass flywheel adds a spring-and-damper system that reduces the torsional vibration transmitted into the driveline. Inertia and torsional damping are related to different aspects of behaviour; they should not be treated as the same thing. Schaeffler: DMF design and torsional vibration.

Types at a glance

ArrangementTypical roleImportant distinction
Single-mass flywheel (SMF)Rigid flywheel and clutch friction face on many manual transmissions.The clutch disc may have its own torsional springs; designs vary.
Dual-mass flywheel (DMF)Two masses connected by a spring and damping system to reduce vibration.Used with some manual, dual-clutch and other transmission arrangements. It is an assembly, not simply a heavy solid wheel.
Flexplate or driveplateCommonly connects the crankshaft to a torque converter in an automatic.Usually a different interface from a manual clutch friction flywheel; terminology and assemblies vary.

Continue to clutches for friction clutch types, manual operation and automated clutch control.

Explore the section

For a specific ECU and engine-control perspective, see ME7 lightweight flywheel, clutch and stalling diagnosis. Always identify the exact engine, transmission and fitted parts before ordering or applying service measurements.

Articles