Delphi DCM
Engine control unit manufacturers, families, variants and their technical references.
8 matching pages
-
Delphi DCM 1.2Reference hub
DCM 1.2 identification, Renault K9K diagnostic scope, injector correction and documented application examples.
-
Delphi DCM 1.2 bench connection pinout
Bench-connection pins (+12 V, ground, K-line) of the Delphi DCM 1.2 in Citroen, Peugeot and Renault applications, with every cavity of the 112-way T1/T2/T3 header drawn.
Applies to: Delphi DCM 1.2
-
Delphi DCM 3.4Reference hub
DCM 3.4 generation evidence, Renault and Dacia diagnostic coverage, processor listings and identification limits.
-
Delphi DCM 3.4 bench connection pinout
Bench-connection pins for the Delphi DCM3.4 diesel ECU in Citroen/Peugeot applications: three-block 128-cavity header with battery, ignition, ground, K-line and CAN pins highlighted.
Applies to: Delphi DCM 3.4
-
Delphi DCM 1.1Reference hub
Delphi DCM 1.1: first-generation 16-bit Euro 3 diesel controller, named for the Renault K9 as well as Kia and Ford Lynx, with identification limits for early 1.5 dCi units.
-
Delphi DCMReference hub
Delphi diesel control-module generations from the 2007 manual. Generation 3.5 is the solenoid OM651 and the DW10C. Later repair lists use the same numbers differently.
-
Delphi DCM3.7 and DCM3.7APReference hub
DCM3.7 and DCM3.7AP identification, selected road vehicle and off-highway coverage, and programming method limitations.
-
Delphi DCM6.1 and DCM6.2
Identification, documented processor and vehicle examples, and programming considerations for Delphi DCM6.1 and DCM6.2 diesel ECU variants.
Applies to: Delphi DCM