Tuning Wiki
Applies to

Check the hardware and software limits stated in this article.

DCM6.1 and DCM6.2 are Delphi diesel ECU designations found in programming-tool application data. They should be identified as distinct models: DCM6.1 is not simply another name for DCM6.2, and DCM6.2 suffixes such as A, AP, C and V must be retained when identifying a unit. A shared family name alone does not establish interchangeability or programming compatibility. [1]

Identification

Record the complete model and suffix, vehicle manufacturer number, Delphi number, hardware and software identifiers, vehicle and engine details, and diagnostic identification where available. A Dimsport DCM6.2 PSA instruction sheet shows an example case label with “DCM6.2A”, hardware number 9809447980 and Delphi number 28494513. These numbers describe that pictured unit only; do not use them as a universal match. [2]

Check the exact part and software identifiers against the relevant vehicle and tool documentation before selecting a replacement or procedure. The source material does not establish what each suffix means, nor that a suffix by itself determines the processor, connector, pinout or contents of a read.

Processor examples

Dimsport's detailed ECU application list records the following processor associations for its listed turbo-diesel applications. These are catalogue entries, not a guarantee for every ECU bearing the same designation. Confirm the actual hardware and applicable tool documentation. [1, page 70]

Listed ECUProcessor in Dimsport listVehicle class in listed row
DCM6.1TC1797Car
DCM6.2AMPC5674FCar
DCM6.2APMPC5674FCar and truck
DCM6.2CMPC5674FCar
DCM6.2VMPC5674FCar

Documented vehicle examples

  • Alientech lists a DCM6.2AP for an Isuzu Taga 3.0 TD AWD diesel, 96 kW, in its KESS3 1.70 release. The page's specific vehicle table labels this entry boot-mode read/write; its introductory text also refers to bench mode, so consult the current exact-vehicle protocol instructions for the actual connection. [3]
  • Alientech lists DCM6.2 examples including Audi A1 1.4 TDI Ultra 66 kW and Audi A3 1.6 TDI Clean Diesel 81 kW in its KESS3 1.80 release. The list does not provide a DCM6.2 suffix for those entries. [4]

These examples are vendor application listings, not fitment claims for every vehicle of the same model or engine. Check market, vehicle identification and the ECU actually fitted.

Reading and writing

Tool capability is specific to the exact ECU, application, software version and licensed protocol. Alientech's cited examples distinguish boot and bench procedures; Dimsport lists separate plugin and protocol identifiers for different DCM6 rows. Neither a processor name nor an example for one vehicle proves that OBD, bench, boot, full read or cloning is available for another. Confirm what each read contains, follow the current tool instructions, and verify a usable recovery path before writing. [4] [1]

Sources

  1. Dimsport, detailed ECU application list, page 70.
  2. Dimsport, NT_DELPHI_DCM6.2_PSA, version 02.01, label illustration.
  3. Alientech, KESS3 upgrade 1.70, DCM6.2AP vehicle table.
  4. Alientech, KESS3 upgrade 1.80, DCM6.2 vehicle table.