PPD 1.1 is the injector unit
Volkswagen Self-Study Programme 352, March 2005, uses PPD 1.1 as the version name of a pump-injector unit, not as the name of an engine controller. The unit is the piezo-valve development of the earlier solenoid pump-injector, PDE-P2. It was developed with Siemens VDO Automotive. The mounting and the two-bolt fixing are carried over so the engine design does not change. The programme says the new units go into the new 2.0-litre 125 kW four-valve TDI, and later into further four-valve TDI engines.
The piezo valve is there so the pilot, the main and the post injection can be shaped more freely than with the solenoid unit. Volkswagen Mechatronic, the production company named in the programme, was founded with Siemens VDO for that unit, at Stollberg in Saxony. The programme is the description of the injector. The workshop literature for the engine is the procedure for pressures, coding and replacement.
The same letters on a controller
File catalogues and ECU sellers use PPD 1.1, PPD 1.2, PPD 1.3 and PPD 1.5 as the name of a Siemens engine controller on Volkswagen Group pump-nozzle diesels, often with Volkswagen part numbers in the 03G 906 018 range. That is a second use of the letters. SSP 352 does not call the control unit PPD. A controller identified that way still has to be matched by its own hardware and software numbers. The injector version and the controller version are allowed to carry related numbers without being the same part.
Bosch EDC16 also controlled Volkswagen pump-nozzle engines. A 2.0 TDI of these years is identified from the controller label. Pump-nozzle and common rail are different fuel systems: the common-rail account is on common-rail diesel fuel systems, and the common-rail Siemens controller in this group is PCR 2.1 or a SID, depending on the label.
Injector identification and service campaign
A Volkswagen 23H9 campaign document identifies 03G 130 073 SX as the specified replacement for BMA, BKP, BVE and BWV, and 03G 130 073 TX for BMR, BUZ and BMN in the vehicles covered by that campaign. It directs a check for earlier D or M stamped units and specifies associated harness replacement where the campaign procedure applies. This is a historical campaign document, not proof that every vehicle with those codes is affected or remains eligible; check the individual VIN and current service information. VW 23H9 campaign document.
The PD injector identification reference compares further sourced part numbers and engine applications. Do not infer that Siemens piezo and Bosch solenoid injectors or their calibrations are interchangeable.
Sources
- Volkswagen Self-Study Programme 352, March 2005, Pumpe-Düse-Einheit mit Piezo-Ventil. PPD 1.1 as the piezo unit developed with Siemens VDO for the 2.0-litre 125 kW four-valve TDI. Catalogue extract: SSP 352 record. Accessed 2026-11-13.
- ECUDB, PPD Maps support notes. PPD1.1, 1.2, 1.3 and 1.5 used there as controller-file names, with Volkswagen and Audi numbers in the 03G 906 018 family, and an explicit warning that Bosch EDC16 was used on similar cars. PPD Maps. Accessed 2026-11-13.