Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Protocols
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

ISO 11783 defines a CAN-based network for agricultural machines and implements. A Universal Terminal can present an implement’s interface using descriptions supplied by the implement.

Tractor network, Implement ECU, Universal Terminal
ISOBUS. Original Tuning Wiki diagram.

Reading the network or diagnostic trace

For a capture, identify the tractor and implement participants, source addresses and PGNs before interpreting payload fields. ISOBUS functions and message definitions require ISO 11783 references even where the encoding resembles J1939.

See SAE J1939 CAN IDs and PGNs and the vehicle diagnostics protocol guide.

Sources: ACTIA IME overview.