J1939 uses extended CAN identifiers for heavy-duty and other applications. A Parameter Group Number identifies the parameter group, and Suspect Parameter Numbers identify parameters within group definitions.
Reading the network or diagnostic trace
Destination-specific PDU1 messages use the PDU Specific field as a destination address, so that byte is excluded from the PGN. In PDU2 the field is a group extension and contributes to the PGN.
See FMS standard heavy-duty truck and bus CAN PGNs and the vehicle diagnostics protocol guide.
Sources: ACTIA IME overview.
Detailed reference
SAE J1939 is the dominant CAN bus standard for heavy-duty trucks, buses, agricultural machinery (ISO 11783 / ISOBUS), industrial diesel engines, and off-highway equipment. Unlike passenger-car buses where each OEM invents proprietary 11-bit CAN IDs, J1939 standardises both the 29-bit identifier structure (Parameter Group Numbers, PGNs) and payload signal definitions (Suspect Parameter Numbers, SPNs) in SAE J1939-71.
Physical Layer and Bit Rates
- SAE J1939-11 / J1939-15: 250 kbit/s classic CAN 2.0B with 29-bit extended identifiers, 120 Ω bus termination at each end.
- SAE J1939-14: 500 kbit/s high-speed physical layer used on newer heavy-duty powertrains and Tier 4 / Euro VI emissions networks.
- Common Source Addresses (SA):
0x00= Engine #1 (Primary ECM),0x01= Engine #2,0x03= Transmission #1,0x0B= Brakes (EBS/ABS),0x17= Instrument Cluster,0x21= Body Controller,0x3D= Exhaust Emission Controller (Aftertreatment),0xF9/0xFA= Off-board diagnostic tools,0xFF= Global destination.
29-Bit CAN ID to PGN Decomposition
A 29-bit J1939 CAN identifier is packed as [Priority (3b) | EDP (1b) | DP (1b) | PF (8b) | PS (8b) | SA (8b)]:
- If PDU Format (PF) < 240 (
0xF0) (PDU1, peer-to-peer):PSis the Destination Address (DA). The PGN zeroes the low byte:PGN = (DP << 16) | (PF << 8). - If PDU Format (PF) ≥ 240 (
0xF0) (PDU2, broadcast):PSis the Group Extension (GE). The PGN includesPS:PGN = (DP << 16) | (PF << 8) | PS. - For example,
0x0CF00400has Priority3(0x0C >> 2), PF0xF0(240 ≥ 240), GE0x04, SA0x00→ PGN 0x00F004 (61444, EEC1) from Engine #1.
Core SAE J1939 PGN Reference Table
Broadcast CAN IDs below assume Priority default and Engine #1 Source Address 0x00 (or relevant default ECU SA). All multi-byte J1939 integers are Intel (little-endian) unless noted otherwise.
| PGN (Dec) | PGN (Hex) | Acronym | Example 29-bit CAN ID | Rate | Key SPNs & Signal Summary |
|---|---|---|---|---|---|
| 61444 | 0xF004 | EEC1 | 0x0CF00400 | 10–50 ms | Electronic Engine Controller 1: Engine speed (SPN 190), driver/actual torque % (SPN 512, 513), torque mode (SPN 899) |
| 61443 | 0xF003 | EEC2 | 0x0CF00300 | 50 ms | Electronic Engine Controller 2: Accelerator pedal 1 (SPN 91), percent load at current speed (SPN 92), kickdown/low-idle switches |
| 65247 | 0xFEDF | EEC3 | 0x18FEDF00 | 250 ms | Electronic Engine Controller 3: Nominal friction % torque (SPN 514), desired operating speed (SPN 515), exhaust mass flow (SPN 6595) |
| 65262 | 0xFEEE | ET1 | 0x18FEEE00 | 1000 ms | Engine Temperature 1: Coolant temp (SPN 110), fuel temp (SPN 174), engine oil temp (SPN 175), turbo oil temp (SPN 176), intercooler temp (SPN 52) |
| 65263 | 0xFEEF | EFL/P1 | 0x18FEEF00 | 500 ms | Engine Fluid Level/Pressure 1: Fuel delivery pressure (SPN 94), oil level (SPN 98), oil pressure (SPN 100), crankcase pressure (SPN 101), coolant pressure/level (SPN 109, 111) |
| 65270 | 0xFEF6 | IC1 | 0x18FEF600 | 500 ms | Inlet/Exhaust Conditions 1: Boost pressure (SPN 102), intake manifold temp (SPN 105), air inlet pressure (SPN 106), EGT (SPN 173) |
| 65265 | 0xFEF1 | CCVS1 | 0x18FEF100 | 100 ms | Cruise Control / Vehicle Speed 1: Wheel-based vehicle speed (SPN 84), parking brake switch (SPN 70), cruise active/set speed (SPN 595, 86) |
| 65266 | 0xFEF2 | LFE1 | 0x18FEF200 | 100 ms | Liquid Fuel Economy: Fuel rate (SPN 183), instantaneous/average fuel economy (SPN 184, 185), throttle position (SPN 51) |
| 65269 | 0xFEF5 | AMB | 0x18FEF500 | 1000 ms | Ambient Conditions: Barometric pressure (SPN 108), ambient air temp (SPN 171), air inlet temp (SPN 172) |
| 65271 | 0xFEF7 | VEP1 | 0x18FEF700 | 1000 ms | Vehicle Electrical Power 1: Net battery current (SPN 114), alternator current (SPN 115), battery potential (SPN 168), keyswitch potential (SPN 158) |
| 65253 | 0xFEE5 | HOURS | 0x18FEE500 | 1000 ms / Req | Engine Hours, Revolutions: Total engine hours (SPN 247), total revolutions (SPN 249) |
| 65257 | 0xFEE9 | FC | 0x18FEE900 | 1000 ms | Fuel Consumption (Liquid): Trip fuel (SPN 182), total fuel used (SPN 250) |
| 65248 | 0xFEE0 | DD | 0x18FEE000 | 1000 ms | Vehicle Distance: Trip distance (SPN 244), total vehicle distance (SPN 245) |
| 61442 | 0xF002 | ETC1 | 0x0CF00203 | 10 ms | Electronic Transmission Controller 1: Driveline engaged, output shaft speed, torque converter lockup |
| 61445 | 0xF005 | ETC2 | 0x18F00503 | 100 ms | Electronic Transmission Controller 2: Selected gear, actual gear ratio, current gear |
| 61441 | 0xF001 | EBC1 | 0x18F0010B | 100 ms | Electronic Brake Controller 1: Brake pedal position, ABS active, ASR/ATC status |
| 65226 | 0xFECA | DM1 | 0x18FECA00 | 1000 ms / Event | Active Diagnostic Trouble Codes (DTCs): Lamp status + SPN/FMI/OC tuples (uses TP.CM/TP.DT when >1 DTC) |
| 60928 | 0xEE00 | AC / NAME | 0x18EEFF00 | On Request | Address Claimed / ECU NAME (64-bit identity, manufacturer code, function) |
Detailed SPN Byte & Scaling Definitions
Byte indices below are 0-based (Byte 0 to Byte 7) as defined in SAE J1939-71. All multi-byte signals are unsigned Intel (little-endian) unless marked signed.
| PGN | CAN ID (SA 00) | SPN | Signal Name | Bytes / Bits | Scale & Offset | Unit |
|---|---|---|---|---|---|---|
61444 (0xF004) | 0x0CF00400 | 899 | Engine Torque Mode | Byte 0, bits 0–3 (4b) | raw × 1 | enum |
61444 (0xF004) | 0x0CF00400 | 512 | Driver's Demand Engine Torque | Byte 1 (8b) | raw − 125 | % |
61444 (0xF004) | 0x0CF00400 | 513 | Actual Engine % Torque | Byte 2 (8b) | raw − 125 | % |
61444 (0xF004) | 0x0CF00400 | 190 | Engine Speed | Bytes 3–4 (16b LE) | raw × 0.125 | rpm |
61444 (0xF004) | 0x0CF00400 | 1483 | Source Address of Controlling Device | Byte 5 (8b) | raw × 1 | SA |
61444 (0xF004) | 0x0CF00400 | 1675 | Engine Starter Mode | Byte 6, bits 0–3 (4b) | raw × 1 | enum |
61444 (0xF004) | 0x0CF00400 | 2432 | Engine Demand % Torque | Byte 7 (8b) | raw − 125 | % |
61443 (0xF003) | 0x0CF00300 | 558 / 559 | Accel Pedal Low Idle / Kickdown Switch | Byte 0, bits 0–1 / 2–3 | raw × 1 | enum |
61443 (0xF003) | 0x0CF00300 | 91 | Accelerator Pedal Position 1 | Byte 1 (8b) | raw × 0.4 | % |
61443 (0xF003) | 0x0CF00300 | 92 | Engine % Load at Current Speed | Byte 2 (8b) | raw × 1 | % |
65262 (0xFEEE) | 0x18FEEE00 | 110 | Engine Coolant Temperature | Byte 0 (8b) | raw − 40 | °C |
65262 (0xFEEE) | 0x18FEEE00 | 174 | Fuel Temperature 1 | Byte 1 (8b) | raw − 40 | °C |
65262 (0xFEEE) | 0x18FEEE00 | 175 | Engine Oil Temperature 1 | Bytes 2–3 (16b LE) | raw × 0.03125 − 273 | °C |
65262 (0xFEEE) | 0x18FEEE00 | 176 | Turbocharger Oil Temperature | Bytes 4–5 (16b LE) | raw × 0.03125 − 273 | °C |
65262 (0xFEEE) | 0x18FEEE00 | 52 | Engine Intercooler Temperature | Byte 6 (8b) | raw − 40 | °C |
65263 (0xFEEF) | 0x18FEEF00 | 94 | Fuel Delivery Pressure | Byte 0 (8b) | raw × 4 | kPa |
65263 (0xFEEF) | 0x18FEEF00 | 98 | Engine Oil Level | Byte 2 (8b) | raw × 0.4 | % |
65263 (0xFEEF) | 0x18FEEF00 | 100 | Engine Oil Pressure | Byte 3 (8b) | raw × 4 | kPa |
65263 (0xFEEF) | 0x18FEEF00 | 101 | Crankcase Pressure | Bytes 4–5 (16b LE) | raw × 0.0078125 − 250 | kPa |
65263 (0xFEEF) | 0x18FEEF00 | 109 | Coolant Pressure | Byte 6 (8b) | raw × 2 | kPa |
65270 (0xFEF6) | 0x18FEF600 | 102 | Engine Intake Manifold #1 Pressure (Boost) | Byte 1 (8b) | raw × 2 | kPa |
65270 (0xFEF6) | 0x18FEF600 | 105 | Engine Intake Manifold 1 Temperature | Byte 2 (8b) | raw − 40 | °C |
65270 (0xFEF6) | 0x18FEF600 | 173 | Exhaust Gas Temperature | Bytes 5–6 (16b LE) | raw × 0.03125 − 273 | °C |
65265 (0xFEF1) | 0x18FEF100 | 70 | Parking Brake Switch | Byte 0, bits 2–3 | raw × 1 | enum |
65265 (0xFEF1) | 0x18FEF100 | 84 | Wheel-Based Vehicle Speed | Bytes 1–2 (16b LE) | raw × 0.00390625 (1/256) | km/h |
65265 (0xFEF1) | 0x18FEF100 | 86 | Cruise Control Set Speed | Byte 5 (8b) | raw × 1 | km/h |
65266 (0xFEF2) | 0x18FEF200 | 183 | Engine Fuel Rate | Bytes 0–1 (16b LE) | raw × 0.05 | L/h |
65266 (0xFEF2) | 0x18FEF200 | 51 | Engine Throttle Valve 1 Position | Byte 6 (8b) | raw × 0.4 | % |
65269 (0xFEF5) | 0x18FEF500 | 108 | Barometric Pressure | Byte 0 (8b) | raw × 0.5 | kPa |
65269 (0xFEF5) | 0x18FEF500 | 171 | Ambient Air Temperature | Bytes 3–4 (16b LE) | raw × 0.03125 − 273 | °C |
65271 (0xFEF7) | 0x18FEF700 | 168 | Battery Potential / Power Input 1 | Bytes 4–5 (16b LE) | raw × 0.05 | V |
65271 (0xFEF7) | 0x18FEF700 | 158 | Keyswitch Battery Potential | Bytes 6–7 (16b LE) | raw × 0.05 | V |
65253 (0xFEE5) | 0x18FEE500 | 247 | Total Engine Hours of Operation | Bytes 0–3 (32b LE) | raw × 0.05 | h |
65257 (0xFEE9) | 0x18FEE900 | 250 | Engine Total Fuel Used | Bytes 4–7 (32b LE) | raw × 0.5 | L |
65248 (0xFEE0) | 0x18FEE000 | 245 | Total Vehicle Distance | Bytes 4–7 (32b LE) | raw × 0.125 | km |
Sources
- J1939 Explained and J1939 PGN List, CSS Electronics. Accessed 2026-11-17.
- Hatz SAE J1939-71 CAN Protocol Specification (E1_CAN-Protokoll.pdf). Accessed 2026-11-17.
- voltage_j1939 SAE J1939 SPN database. Accessed 2026-11-17.