Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Protocols
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

CAN FD increases payload capacity to 64 bytes and can switch to a higher bit rate for the data phase. Nodes must agree on the nominal rate used during arbitration and the configured data-phase rate when bit-rate switching is used.

Arbitration at nominal rate, Data phase at configured rate, End at nominal rate
CAN FD. Original Tuning Wiki diagram.

Reading the network or diagnostic trace

Above eight bytes the DLC is a code rather than the byte count. Codes 9 to 15 represent 12, 16, 20, 24, 32, 48 and 64 bytes. Decode the actual payload length before applying an ISO-TP layout.

See ISO-TP on CAN and the vehicle diagnostics protocol guide.

Sources: ACTIA IME overview.