CAN FD increases payload capacity to 64 bytes and can switch to a higher bit rate for the data phase. Nodes must agree on the nominal rate used during arbitration and the configured data-phase rate when bit-rate switching is used.
Reading the network or diagnostic trace
Above eight bytes the DLC is a code rather than the byte count. Codes 9 to 15 represent 12, 16, 20, 24, 32, 48 and 64 bytes. Decode the actual payload length before applying an ISO-TP layout.
See ISO-TP on CAN and the vehicle diagnostics protocol guide.
Sources: ACTIA IME overview.