Dimsport is an Italian vehicle electronics and test-equipment company whose DYNO range includes passenger-car rolling roads, motorcycle dynos, heavy-vehicle chassis equipment and tractor power-take-off (PTO) dynamometers. Its own range identifies the DynoRace, DynoBike, Dyno Truck and Dyno Tractor families. Dimsport DYNO range.

History
Dimsport's company brochure dates its origins to 1991 in racing-engine calibration, records expansion into Rapid Bike motorcycle electronics in 2004, and says it began production of its DYNO test-bench line in 2005. Its headquarters moved to Serralunga di Crea, Alessandria, Italy in 2012. The company also supplies ECU programming and auxiliary-control products; these are distinct from the dyno's measurement and brake control systems. Dimsport 2025 company brochure.
How the vehicle dynamometers work
In DynoRace inertia versions, a vehicle's driven wheels accelerate the test stand's flywheel and rollers; acceleration of known inertia is used to infer torque and power. Braked versions add an eddy-current absorber whose resistance can be controlled to impose load. The actual delivered reading depends on the roller, tyre and driveline measurement boundary and the equipment's loss and correction procedures. Dimsport DynoRace 2WD; see also inertia dynos and eddy-current brakes.
Some four-wheel-drive installations link roller sets. Dimsport's A²CTION uses an optionally disconnectable mechanical driveshaft link, while its Easy Action specifies a non-disconnectable mechanical link. The presence of a link does not mean that every vehicle can be safely tested: use the applicable vehicle and dynamometer instructions. See rolling-road systems.

Representative models
| Family or model | Published configuration and example figures |
|---|---|
| DynoRace DF2I / DF2IS / DF2FS | 2WD passenger-car/light-commercial range. DF2I and DF2IS are described as inertia models; DF2FS adds an eddy-current brake. Published comparison lists 318 mm rollers, 300 km/h maximum speed and 400 kW maximum wheel power for the stated versions. The compact DF2I can be trailer-mounted as a race support unit according to Dimsport. |
| DynoRace DF4IS / DF4FS | 4WD inertia and braked roller models respectively. The listed specifications show 2,500 kg maximum per axle and up to 300 km/h; the braked version uses eddy-current load. Dimsport also describes a separately designated DF4FSHLS installation with hydraulic linking. |
| DynoRace A²CTION | 4WD braked single-roller arrangement with mechanical front/rear connection and adjustable wheelbase. Dimsport lists 605 mm rollers, 880 kW maximum power, 300 km/h and 2,500 kg maximum load per axle. An electric motor and inverter are optional; do not assume all installations can drive the rollers. |
| DynoRace Easy Action | 4WD single-roller braked system with non-disconnectable mechanical axle connection; published examples include 504 mm rollers, 285 km/h maximum speed and 650 kW maximum load. Confirm whether a particular vehicle is compatible with the linked layout. |
| DynoBike | Motorcycle dynamometer combining inertia and brake operation, according to the manufacturer. Model names, accessories and current capacities should be confirmed for the specific machine. |
| Dyno Truck DF2T / DF4T | Heavy-duty chassis dynamometers for power testing and road simulation. The manufacturer lists 16,000 kg maximum per axle for its DF2/4T specifications; linked or additional-axle equipment depends on variant. |
| Dyno Tractor DF2TR2-MAX / DF4TR2-MAX | PTO shaft dynamometers with load cells and eddy-current brakes. Dimsport lists 250 kW and 500 kW maximum brake power respectively, and a time-dependent test table. PTO power is measured at the PTO, not directly at the engine crankshaft. |
Quoted figures come from supplier pages for the stated configurations. Maximum speed, power, torque, axle load and cooling duty are different constraints and are not necessarily available simultaneously. Verify the exact machine, options, test duration and vehicle compatibility with the supplier.
Tractor PTO testing
A PTO dynamometer couples to the tractor's power-take-off shaft rather than loading the driven road tyres. The PTO turns the absorber; a load cell measures reaction and the control system combines load and speed to report output. Guard the shaft and connections and follow machine and tractor instructions. Dimsport's tractor table explicitly varies permitted test power with time, illustrating why a peak rating alone is insufficient for a sustained test. Dimsport Dyno Tractor specifications.

Controls and data
Dimsport describes PC-based data display, graphs and export with a vehicle database. DynoRace software supports analysis and comparison of OBDII information with an appropriate interface; the supplier says Dynoplus is available for A²CTION. The DF2FS page lists constant-rpm and constant-tractive-force load modes, while optional acquisition and wideband lambda equipment can add channels. Features, software versions and interfaces are configuration-dependent. Dimsport DYNO overview; DF2 series.
See dynamometer control systems, measurement and interpretation and test setup and safety.