Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Dynamometers
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Taylor Dyno

Taylor Dyno, formerly Taylor Dynamometer, supplies engine and vehicle test equipment, instrumentation and test-cell solutions. Power Test identifies Taylor Dyno as one of its brands and describes more than 90 years of testing history. Its range includes water-brake engine dynamometers, towing dynamometers and data acquisition. Taylor Dyno brand and equipment.

Taylor Dyno DX series water-brake engine dynamometer
Taylor Dyno DX-series water-brake engine dynamometer. Image: Power Test / Taylor Dyno, used with permission.

Water-brake principle

An engine drives a rotor in a water-filled absorber. The rotor transfers momentum into the water, and the reaction on the housing is measured through a known lever and load cell. Regulating water flow and the absorber's filling changes the load available at a given speed. Most absorbed shaft power becomes heat, carried away by the water and cooling system. A water brake is a passive absorber: it cannot motor the engine. Taylor DX30-series documentation; see also water and oil hydraulic brakes.

Representative models and equipment

Family or modelApplication and published details
DX series, including DX31, DX33, DX35 and DX38Water-brake engine dynamometers. The current Power Test DX page marks several named DX models as superseded: for example DX31 by W-HS350, DX33 by W-HS1050 and DX38 by W-ST1750. Check exact replacement dimensions, rating and system configuration rather than assuming a drop-in swap. DX series and successors.
DS, DH and M2 seriesOther Taylor water-brake engine dynamometer families shown in the manufacturer's catalogue. Match the particular machine to the engine's torque and speed curve, operating duration and cooling supply. Taylor Dyno catalogue.
TD-3100 and TD-3102Portable water-brake engine dynamometers. Power Test lists both at 1,250 hp (932 kW), with maximum speeds of 4,000 and 6,000 rpm respectively. A fixed-base mount kit is also offered. These are engine-coupled testers, not vehicle on-road wheel-power meters. Check the relevant current machine documentation for torque and required water supply. Portable series.
RSL-25KTowed eddy-current load trailer. The published brochure lists 25,000 N maximum drawbar pull and DynPro software, and recommends use within controlled test facilities. Trailer dynamic loads and road licensing require their own assessment. RSL-25K brochure.

The power, torque and speed ratings are separate envelope limits; not every maximum can be sustained simultaneously. Verify the published torque-speed curve, permissible duty, water quality, temperature and flow for the specific model and installation.

Control and instrumentation

DynPro 2 is Taylor's data acquisition and control system, described for engine, vehicle and industrial component testing. Published features include automated tests, configurable reporting, alarms and communication with engine control modules using supported protocols including J1939. Its configured I/O, load-control hardware and installed safety systems determine what it can operate. Taylor also lists DynTek-PC as a display-only instrument for basic engine dynamometer use; it should not be assumed to provide the same automation as DynPro 2.

A test cell may also require engine mounting carts, guarded couplings, engine coolant conditioning, brake-water circulation, exhaust extraction and an independent safety arrangement. See test setup and safety, Power Test dynamometers, and the manufacturer directory.