Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
RM-Primis universal standalone ECU
Applies to
RM-Primis universal standalone ECU
Tool groups
None
Manufacturers
Audi, SEAT, Škoda, Volkswagen

Changes from revision 2 to revision 3

Removed text is struck through; added text is highlighted.

RM-Primis VAG 1.8T ME7.1 ME7.5 plug-in ECU is an application-specific RM Racing Electronics kit combining its RM-Primis standalone ECU with an adapter to selected original vehicle engine harnesses. Manufacturer product information.

RM Racing uses this image on both VAG kit listings; it is a family illustration and adapters differ. Manufacturer source, reproduced with permission.

Applications and compatibility

The manufacturer lists ME7.1 or ME7.5 1.8T applications. The manufacturer lists AJQ, APP, ARZ, ARX, ARY, AUM, AUQ, APU, AVJ, AWT, BEX, BFB, BBU, AWC, AVC, APH, BAM and AQX engine codes.

The vendor describes a separate ME7.1/ME7.5 harness adapter, ECU adapter cable and optional LSU 4.9 sensor. Electronic-throttle control depends on the selected ECU set; do not apply the M3.8 adapter schedule or assume every vehicle module is retained. Confirm the original ECU code, throttle, loom, immobiliser and CAN dependencies before ordering or wiring.

Control and wiring

RM-Tuner handles tuning and logging. The manufacturer lists 400 kPa MAP, CAN, six ignition and six injection channels, boost and variable-cam control, with electronic throttle and Bosch LSU wideband equipment dependent on selected options. The supplied kit includes the RM-Primis ECU and a VAG-specific adaptor; it is not simply a reflashed stock ECU.

A complete cavity-by-cavity ECU, adapter and original-vehicle pin schedule is not verified on the sales page. Obtain the exact kit documentation and use the RM-Primis documentation for the delivered hardware.

Reference

Manufacturer application and kit listing; RM-Primis platform.

Adapter auxiliary connectors — Audi/VW ME7.5 and 7.x adapter

RM Racing’s RM-Primis booklet, PDF page 14, documents the following six-way accessory connector assignments for the adapter named above. These are the adapter’s auxiliary and LSU connectors, not the factory vehicle connector and not the 32-way board-to-ECU headers shown in the drawing. The booklet gives a generic 32-way header schedule separately on PDF page 12; see the board-header tables below. Match the actual adapter board and revision before using this schedule. The booklet says the marked high-side channels are converted on the adapter board to ground-switching outputs; select the corresponding high-side channel in RM-Tuner. It also states that injector outputs are low-side outputs and can be used as general-purpose outputs, subject to the actual configuration.RM Racing’s RM-Primis booklet, PDF page 14, documents the following six-way accessory connector assignments for the adapter named above. These are the adapter’s auxiliary and LSU connectors, not the factory vehicle connector and not the 32-way board-to-ECU headers shown in the drawing. The source labels those larger headers by position but does not supply their per-pin functions. Match the actual adapter board and revision before using this schedule. The booklet says the marked high-side channels are converted on the adapter board to ground-switching outputs; select the corresponding high-side channel in RM-Tuner. It also states that injector outputs are low-side outputs and can be used as general-purpose outputs, subject to the actual configuration.

LSU 4.9 wideband adapter connector

Adapter pinSignalSensor wire colourLSU 4.9 sensor pin1H−White32VSBlack63RcalGreen54H+Grey45VS/IPYellow26IPRed1

Auxiliary connector 1

PinManufacturer function1CAN low2CAN high3Spare voltage input 34MAF / analogue voltage input5Low-side general-purpose output 56Spare voltage input 2

Auxiliary connector 2

PinManufacturer function1High-side output 2 (converted on board to low-side output)2High-side output 3 (converted on board to low-side output)3High-side output 4 (converted on board to low-side output)4Injector output 6 (low-side; may be used as GP output)5Injector output 5 (low-side; may be used as GP output)6Spare temperature input 1

RM-Primis plug-in adapter board headersThe RM Racing booklet, PDF page 12, labels the RM-Primis plug-in adapter’s left and right 32-position board headers looking straight at the board. The model-specific diagrams in the booklet show the same header layout; use these tables only after matching the actual board and revision. These are board-side connector positions, not the original vehicle’s loom or ECU connector cavity numbers. Vehicle-specific adapters can route or condition signals differently; consult the model-specific auxiliary notes above and confirm the wiring before connecting devices.Header 1 — left side of boardBoard-header positionManufacturer function1Injector output 12Injector output 23Injector output 34Injector output 45Injector output 56Injector output 67Ignition output 18Ignition output 29Ignition output 310Ignition output 411Ignition output 512Ignition output 613Fuel pump output14Low-side GP 115Low-side GP 216Low-side GP 317Ground18Ignition-switch input +12 V19Permanent battery +12 V20LSU IP21LSU RCAL22LSU VS/IP23LSU VS24LSU H+25LSU H−26Tachometer output27High-side GP 428High-side GP 329High-side GP 2 push-pull30High-side GP 1 push-pull31Low-side GP 532Low-side GP 4Header 2 — right side of boardBoard-header positionManufacturer function1Throttle position sensor input2Coolant temperature sensor input3Intake air temperature sensor input4Digital / trigger input 1 (pull-up selectable)5Digital / trigger input 2 (pull-up selectable)6Digital / trigger Hall input (no pull-up)7MAF / analogue voltage input8Spare voltage input 19Spare voltage input 210Spare voltage input 311Spare voltage input 412Spare voltage input 5 (pedal 2 when DBW)13Spare temperature input 114Spare temperature input 2 (pedal 1 when DBW)15DBW TPS input 2165 V output for sensors17DBW motor +18DBW motor −19Ground20Ground21Ground225 V output for sensors23CAN low24CAN high25Knock sensor 2 −26Knock sensor 2 + signal27Knock sensor 1 −28Knock sensor 1 + signal29Variable-reluctance sensor 2 −30Variable-reluctance sensor 2 +31Variable-reluctance sensor 1 − (adjustable threshold)32Variable-reluctance sensor 1 + (adjustable threshold)

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: RM-Primis VAG 1.8T ME7.1 ME7.5 plug-in ECU

RM-Primis VAG 1.8T ME7.1 ME7.5 plug-in ECU is an application-specific RM Racing Electronics kit combining its RM-Primis standalone ECU with an adapter to selected original vehicle engine harnesses. Manufacturer product information.

RM-Primis VAG kit
RM Racing uses this image on both VAG kit listings; it is a family illustration and adapters differ. Manufacturer source, reproduced with permission.

Applications and compatibility

The manufacturer lists ME7.1 or ME7.5 1.8T applications. The manufacturer lists AJQ, APP, ARZ, ARX, ARY, AUM, AUQ, APU, AVJ, AWT, BEX, BFB, BBU, AWC, AVC, APH, BAM and AQX engine codes.

The vendor describes a separate ME7.1/ME7.5 harness adapter, ECU adapter cable and optional LSU 4.9 sensor. Electronic-throttle control depends on the selected ECU set; do not apply the M3.8 adapter schedule or assume every vehicle module is retained. Confirm the original ECU code, throttle, loom, immobiliser and CAN dependencies before ordering or wiring.

Control and wiring

RM-Tuner handles tuning and logging. The manufacturer lists 400 kPa MAP, CAN, six ignition and six injection channels, boost and variable-cam control, with electronic throttle and Bosch LSU wideband equipment dependent on selected options. The supplied kit includes the RM-Primis ECU and a VAG-specific adaptor; it is not simply a reflashed stock ECU.

A complete cavity-by-cavity ECU, adapter and original-vehicle pin schedule is not verified on the sales page. Obtain the exact kit documentation and use the RM-Primis documentation for the delivered hardware.

Reference

Manufacturer application and kit listing; RM-Primis platform.

Adapter auxiliary connectors — Audi/VW ME7.5 and 7.x adapter

RM Racing’s RM-Primis booklet, PDF page 14, documents the following six-way accessory connector assignments for the adapter named above. These are the adapter’s auxiliary and LSU connectors, not the factory vehicle connector and not the 32-way board-to-ECU headers shown in the drawing. The source labels those larger headers by position but does not supply their per-pin functions. Match the actual adapter board and revision before using this schedule. The booklet says the marked high-side channels are converted on the adapter board to ground-switching outputs; select the corresponding high-side channel in RM-Tuner. It also states that injector outputs are low-side outputs and can be used as general-purpose outputs, subject to the actual configuration.

LSU 4.9 wideband adapter connector

Adapter pinSignalSensor wire colourLSU 4.9 sensor pin
1H−White3
2VSBlack6
3RcalGreen5
4H+Grey4
5VS/IPYellow2
6IPRed1

Auxiliary connector 1

PinManufacturer function
1CAN low
2CAN high
3Spare voltage input 3
4MAF / analogue voltage input
5Low-side general-purpose output 5
6Spare voltage input 2

Auxiliary connector 2

PinManufacturer function
1High-side output 2 (converted on board to low-side output)
2High-side output 3 (converted on board to low-side output)
3High-side output 4 (converted on board to low-side output)
4Injector output 6 (low-side; may be used as GP output)
5Injector output 5 (low-side; may be used as GP output)
6Spare temperature input 1
Revision 3: RM-Primis VAG 1.8T ME7.1 ME7.5 plug-in ECU

RM-Primis VAG 1.8T ME7.1 ME7.5 plug-in ECU is an application-specific RM Racing Electronics kit combining its RM-Primis standalone ECU with an adapter to selected original vehicle engine harnesses. Manufacturer product information.

RM-Primis VAG kit
RM Racing uses this image on both VAG kit listings; it is a family illustration and adapters differ. Manufacturer source, reproduced with permission.

Applications and compatibility

The manufacturer lists ME7.1 or ME7.5 1.8T applications. The manufacturer lists AJQ, APP, ARZ, ARX, ARY, AUM, AUQ, APU, AVJ, AWT, BEX, BFB, BBU, AWC, AVC, APH, BAM and AQX engine codes.

The vendor describes a separate ME7.1/ME7.5 harness adapter, ECU adapter cable and optional LSU 4.9 sensor. Electronic-throttle control depends on the selected ECU set; do not apply the M3.8 adapter schedule or assume every vehicle module is retained. Confirm the original ECU code, throttle, loom, immobiliser and CAN dependencies before ordering or wiring.

Control and wiring

RM-Tuner handles tuning and logging. The manufacturer lists 400 kPa MAP, CAN, six ignition and six injection channels, boost and variable-cam control, with electronic throttle and Bosch LSU wideband equipment dependent on selected options. The supplied kit includes the RM-Primis ECU and a VAG-specific adaptor; it is not simply a reflashed stock ECU.

A complete cavity-by-cavity ECU, adapter and original-vehicle pin schedule is not verified on the sales page. Obtain the exact kit documentation and use the RM-Primis documentation for the delivered hardware.

Reference

Manufacturer application and kit listing; RM-Primis platform.

Adapter auxiliary connectors — Audi/VW ME7.5 and 7.x adapter

RM Racing’s RM-Primis booklet, PDF page 14, documents the following six-way accessory connector assignments for the adapter named above. These are the adapter’s auxiliary and LSU connectors, not the factory vehicle connector and not the 32-way board-to-ECU headers shown in the drawing. The booklet gives a generic 32-way header schedule separately on PDF page 12; see the board-header tables below. Match the actual adapter board and revision before using this schedule. The booklet says the marked high-side channels are converted on the adapter board to ground-switching outputs; select the corresponding high-side channel in RM-Tuner. It also states that injector outputs are low-side outputs and can be used as general-purpose outputs, subject to the actual configuration.

LSU 4.9 wideband adapter connector

Adapter pinSignalSensor wire colourLSU 4.9 sensor pin
1H−White3
2VSBlack6
3RcalGreen5
4H+Grey4
5VS/IPYellow2
6IPRed1

Auxiliary connector 1

PinManufacturer function
1CAN low
2CAN high
3Spare voltage input 3
4MAF / analogue voltage input
5Low-side general-purpose output 5
6Spare voltage input 2

Auxiliary connector 2

PinManufacturer function
1High-side output 2 (converted on board to low-side output)
2High-side output 3 (converted on board to low-side output)
3High-side output 4 (converted on board to low-side output)
4Injector output 6 (low-side; may be used as GP output)
5Injector output 5 (low-side; may be used as GP output)
6Spare temperature input 1

RM-Primis plug-in adapter board headers

The RM Racing booklet, PDF page 12, labels the RM-Primis plug-in adapter’s left and right 32-position board headers looking straight at the board. The model-specific diagrams in the booklet show the same header layout; use these tables only after matching the actual board and revision. These are board-side connector positions, not the original vehicle’s loom or ECU connector cavity numbers. Vehicle-specific adapters can route or condition signals differently; consult the model-specific auxiliary notes above and confirm the wiring before connecting devices.

Header 1 — left side of board

Board-header positionManufacturer function
1Injector output 1
2Injector output 2
3Injector output 3
4Injector output 4
5Injector output 5
6Injector output 6
7Ignition output 1
8Ignition output 2
9Ignition output 3
10Ignition output 4
11Ignition output 5
12Ignition output 6
13Fuel pump output
14Low-side GP 1
15Low-side GP 2
16Low-side GP 3
17Ground
18Ignition-switch input +12 V
19Permanent battery +12 V
20LSU IP
21LSU RCAL
22LSU VS/IP
23LSU VS
24LSU H+
25LSU H−
26Tachometer output
27High-side GP 4
28High-side GP 3
29High-side GP 2 push-pull
30High-side GP 1 push-pull
31Low-side GP 5
32Low-side GP 4

Header 2 — right side of board

Board-header positionManufacturer function
1Throttle position sensor input
2Coolant temperature sensor input
3Intake air temperature sensor input
4Digital / trigger input 1 (pull-up selectable)
5Digital / trigger input 2 (pull-up selectable)
6Digital / trigger Hall input (no pull-up)
7MAF / analogue voltage input
8Spare voltage input 1
9Spare voltage input 2
10Spare voltage input 3
11Spare voltage input 4
12Spare voltage input 5 (pedal 2 when DBW)
13Spare temperature input 1
14Spare temperature input 2 (pedal 1 when DBW)
15DBW TPS input 2
165 V output for sensors
17DBW motor +
18DBW motor −
19Ground
20Ground
21Ground
225 V output for sensors
23CAN low
24CAN high
25Knock sensor 2 −
26Knock sensor 2 + signal
27Knock sensor 1 −
28Knock sensor 1 + signal
29Variable-reluctance sensor 2 −
30Variable-reluctance sensor 2 +
31Variable-reluctance sensor 1 − (adjustable threshold)
32Variable-reluctance sensor 1 + (adjustable threshold)