Removed text is struck through; added text is highlighted.
Edelbrock Pro-Flo 4 Plus 36130 GM Gen III/IV LS: Pro-Flo 4+ 36130 is the manufacturer’s engine-management kit listed for GM Gen III/IV LS. It uses a separate, weather-resistant ECU, a matching terminated harness and an application-specific base calibration; it controls an appropriate modern EFI engine and does not by itself replace a carburettor. Verify the engine generation, reluctor or trigger, sensors, throttle body, pedal, variable-cam and auxiliary harnesses against the exact kit. Edelbrock’s selection guide identifies this engine and kit number.
Edelbrock installation manual cover for the GM LS family; applications and harnesses differ. Edelbrock source; reproduced with permission.
Selection and system layout
Identify the exact ECU, engine and kit part number, intake and throttle, sensor and ignition arrangement. The phone or tablet app is the calibration and monitoring interface, not the ECU. Fuel delivery, return plumbing and auxiliary components depend on the package. Consult the manufacturer documentation for the specific configuration.
Wiring documentation
Use the model-specific Edelbrock source for hardware and wiring. A complete numbered ECU connector table has not yet been verified for this page; do not substitute the assignment of another Pro-Flo or E-Street system.
Manufacturer harness connector referencesEdelbrock’s kit 36130 installation manual, PDF pages 20–21, depicts main engine harness 37-1024 and chassis harness 37-1026. These tables identify the labelled branches and customer-wired leads, not the individual cavities of the ECU connectors. Confirm the actual kit, engine-specific extensions and connector orientation before wiring.Main engine harness 37-1024Harness labelManufacturer identificationECUEngine harness connector to the ECU; exact ECU cavity numbering is not suppliedBRIDGEConnection to chassis harness bridgeINJ. R1–R4Four right-bank injector branches, individually labelled R1, R2, R3 and R4INJ. L1–L4Four left-bank injector branches, individually labelled L1, L2, L3 and L4KNOCK SENSORConnection to the applicable knock sensor harnessTHROTTLEConnection to the application throttle harnessIGNITIONConnection to the application ignition/coil harnessENGINE POSITIONConnection to the application engine-position harnessSENS/OUTConnection to the application sensors/outputs harnessChassis harness 37-1026Harness labelManufacturer identificationECUChassis harness ECU connectionBRIDGEConnection to main engine harness bridgeCANCAN communication connectorAPPAccelerator pedal harness connectionO2 #1Primary oxygen sensor; manufacturer specifies this sensorO2 #2Optional second oxygen sensorFUEL PUMPGrey two-way connector; source specifies maximum 10 A, with relay if the pump exceeds thisFANSLow-current ground outputs to fan relay triggers, not direct fan powerMAIN RELAY / FUSE BOXPower distribution and protectionBattery positive / negativeBattery connections; follow the manufacturer’s power and grounding instructionsChassis flying leadsWire colourFunctionManufacturer notesPink/blackIgnition switch +12 VSupply present in both ON and CRANK per manufacturerYellow/blueBrake light switchBrake input senses +12 V with brake pressed; part of drive-by-wire safetyLight blue/pinkTachometer output12 V square-wave output according to the manualCAN harness connector — documented positionsThe manual identifies a Deutsch DT04-4P mating connector and lists the following CAN positions. It does not establish functions for positions 3 and 4 in that description or give an explicit viewing orientation; do not infer them.Connector positionFunction1CAN high2CAN low3Not specified in cited pin description4Not specified in cited pin descriptionSource inconsistency: section 2.2 calls the large ECU connector a chassis-harness connector, while section 3.1 separately calls the chassis-harness connector the smaller one. The drawings label the engine and chassis harnesses separately. Confirm the exact connector identification against the actual harness and Edelbrock before connecting.Engine-specific harness selectionThe LS manual lists 24X ignition/engine-position harness 36112 or 58X harness 36122, and single-throttle harness 36132 or dual-throttle harness 36142, separately. It also identifies sensor harness 36165 for a two-pin alternator or 36155 for a four-pin alternator. Confirm the crank trigger and optional parts against PDF pages 11–12. Kit manual.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Edelbrock Pro-Flo 4 Plus 36130 GM Gen III/IV LS
Edelbrock Pro-Flo 4 Plus 36130 GM Gen III/IV LS: Pro-Flo 4+ 36130 is the manufacturer’s engine-management kit listed for GM Gen III/IV LS. It uses a separate, weather-resistant ECU, a matching terminated harness and an application-specific base calibration; it controls an appropriate modern EFI engine and does not by itself replace a carburettor. Verify the engine generation, reluctor or trigger, sensors, throttle body, pedal, variable-cam and auxiliary harnesses against the exact kit. Edelbrock’s selection guide identifies this engine and kit number.
Edelbrock installation manual cover for the GM LS family; applications and harnesses differ. Edelbrock source; reproduced with permission.
Selection and system layout
Identify the exact ECU, engine and kit part number, intake and throttle, sensor and ignition arrangement. The phone or tablet app is the calibration and monitoring interface, not the ECU. Fuel delivery, return plumbing and auxiliary components depend on the package. Consult the manufacturer documentation for the specific configuration.
Wiring documentation
Use the model-specific Edelbrock source for hardware and wiring. A complete numbered ECU connector table has not yet been verified for this page; do not substitute the assignment of another Pro-Flo or E-Street system.
Revision 2: Edelbrock Pro-Flo 4 Plus 36130 GM Gen III/IV LS
Edelbrock Pro-Flo 4 Plus 36130 GM Gen III/IV LS: Pro-Flo 4+ 36130 is the manufacturer’s engine-management kit listed for GM Gen III/IV LS. It uses a separate, weather-resistant ECU, a matching terminated harness and an application-specific base calibration; it controls an appropriate modern EFI engine and does not by itself replace a carburettor. Verify the engine generation, reluctor or trigger, sensors, throttle body, pedal, variable-cam and auxiliary harnesses against the exact kit. Edelbrock’s selection guide identifies this engine and kit number.
Edelbrock installation manual cover for the GM LS family; applications and harnesses differ. Edelbrock source; reproduced with permission.
Selection and system layout
Identify the exact ECU, engine and kit part number, intake and throttle, sensor and ignition arrangement. The phone or tablet app is the calibration and monitoring interface, not the ECU. Fuel delivery, return plumbing and auxiliary components depend on the package. Consult the manufacturer documentation for the specific configuration.
Wiring documentation
Use the model-specific Edelbrock source for hardware and wiring. A complete numbered ECU connector table has not yet been verified for this page; do not substitute the assignment of another Pro-Flo or E-Street system.
Manufacturer harness connector references
Edelbrock’s kit 36130 installation manual, PDF pages 20–21, depicts main engine harness 37-1024 and chassis harness 37-1026. These tables identify the labelled branches and customer-wired leads, not the individual cavities of the ECU connectors. Confirm the actual kit, engine-specific extensions and connector orientation before wiring.
Main engine harness 37-1024
Harness label
Manufacturer identification
ECU
Engine harness connector to the ECU; exact ECU cavity numbering is not supplied
BRIDGE
Connection to chassis harness bridge
INJ. R1–R4
Four right-bank injector branches, individually labelled R1, R2, R3 and R4
INJ. L1–L4
Four left-bank injector branches, individually labelled L1, L2, L3 and L4
KNOCK SENSOR
Connection to the applicable knock sensor harness
THROTTLE
Connection to the application throttle harness
IGNITION
Connection to the application ignition/coil harness
ENGINE POSITION
Connection to the application engine-position harness
SENS/OUT
Connection to the application sensors/outputs harness
Chassis harness 37-1026
Harness label
Manufacturer identification
ECU
Chassis harness ECU connection
BRIDGE
Connection to main engine harness bridge
CAN
CAN communication connector
APP
Accelerator pedal harness connection
O2 #1
Primary oxygen sensor; manufacturer specifies this sensor
O2 #2
Optional second oxygen sensor
FUEL PUMP
Grey two-way connector; source specifies maximum 10 A, with relay if the pump exceeds this
FANS
Low-current ground outputs to fan relay triggers, not direct fan power
MAIN RELAY / FUSE BOX
Power distribution and protection
Battery positive / negative
Battery connections; follow the manufacturer’s power and grounding instructions
Chassis flying leads
Wire colour
Function
Manufacturer notes
Pink/black
Ignition switch +12 V
Supply present in both ON and CRANK per manufacturer
Yellow/blue
Brake light switch
Brake input senses +12 V with brake pressed; part of drive-by-wire safety
Light blue/pink
Tachometer output
12 V square-wave output according to the manual
CAN harness connector — documented positions
The manual identifies a Deutsch DT04-4P mating connector and lists the following CAN positions. It does not establish functions for positions 3 and 4 in that description or give an explicit viewing orientation; do not infer them.
Connector position
Function
1
CAN high
2
CAN low
3
Not specified in cited pin description
4
Not specified in cited pin description
Source inconsistency: section 2.2 calls the large ECU connector a chassis-harness connector, while section 3.1 separately calls the chassis-harness connector the smaller one. The drawings label the engine and chassis harnesses separately. Confirm the exact connector identification against the actual harness and Edelbrock before connecting.
Engine-specific harness selection
The LS manual lists 24X ignition/engine-position harness 36112 or 58X harness 36122, and single-throttle harness 36132 or dual-throttle harness 36142, separately. It also identifies sensor harness 36165 for a two-pin alternator or 36155 for a four-pin alternator. Confirm the crank trigger and optional parts against PDF pages 11–12. Kit manual.