Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
FiTech standalone and throttle-body EFI systems
Applies to
FiTech standalone and throttle-body EFI systems
Tool groups
None
Manufacturers
None

Changes from revision 1 to revision 1

Removed text is struck through; added text is highlighted.

FiTech 30065 Go EFI 2×4 1200 HP Bright Aluminum EFI Power Adder is a self-learning dual-quad throttle-body fuel-injection system. This kit uses two four-barrel throttle bodies and a compatible dual-quad manifold. FiTech describes one throttle body as the control unit and the other as carrying additional injectors on the 625 and 1200 hp Go EFI 2×4 kits; confirm the arrangement against the exact kit instructions.

FiTech’s product image for 30065; kit contents and finish should be checked against the exact part number. Source: FiTech product listing; reproduced with permission.

Identification and fitment

Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The manifold needs two compatible four-barrel mounting locations. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30065 specifications.

ItemManufacturer listingFiTech model30065Manufacturer maximum power1200 HPMounting flangeDual 4-barrel square boreECU includedYesThrottle-body finishPolishedFuel pump included in listed base kitNoTiming control, manufacturer listingYesPower-adder compatible, manufacturer listingYes

Control and installation

FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.

Customer harness wire reference

FiTech’s Go EFI installation instructions, revision 18 June 2024, include this model and show Harness A and the four-plus-two customer connector on pages 5–6. This is a wire-colour reference; the source does not assign numbered connector cavities. Follow the appropriate ignition diagram for the actual installation and verify the hardware version.

Wire or connectionManufacturer-described functionLarge redBattery supplyWhiteSwitched ignition-on and cranking supplyLarge orangeFuel pump positive supplyBlueEngine speed input when timing control is not usedBlackCoil trigger when timing control is usedYellowFan 1 relay controlYellow/black leadCoolant temperature sensor; separate lead from throttle bodyViolet / green pairMagnetic pickup positive / negative when using timing controlOxygen-sensor cableWideband oxygen-sensor harness

Power-adder option harness

The same manual lists an optional four-wire power-adder harness. These are wire functions, not numbered cavity assignments.

WireFunctionThin redAir-conditioning inputBlackFan 2 relay controlWhiteNitrous arming inputTanNitrous relay control

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: FiTech 30065 Go EFI 2×4 1200 HP Bright Aluminum EFI Power Adder

FiTech 30065 Go EFI 2×4 1200 HP Bright Aluminum EFI Power Adder is a self-learning dual-quad throttle-body fuel-injection system. This kit uses two four-barrel throttle bodies and a compatible dual-quad manifold. FiTech describes one throttle body as the control unit and the other as carrying additional injectors on the 625 and 1200 hp Go EFI 2×4 kits; confirm the arrangement against the exact kit instructions.

FiTech 30065 throttle-body EFI
FiTech’s product image for 30065; kit contents and finish should be checked against the exact part number. Source: FiTech product listing; reproduced with permission.

Identification and fitment

Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The manifold needs two compatible four-barrel mounting locations. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30065 specifications.

ItemManufacturer listing
FiTech model30065
Manufacturer maximum power1200 HP
Mounting flangeDual 4-barrel square bore
ECU includedYes
Throttle-body finishPolished
Fuel pump included in listed base kitNo
Timing control, manufacturer listingYes
Power-adder compatible, manufacturer listingYes

Control and installation

FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.

Customer harness wire reference

FiTech’s Go EFI installation instructions, revision 18 June 2024, include this model and show Harness A and the four-plus-two customer connector on pages 5–6. This is a wire-colour reference; the source does not assign numbered connector cavities. Follow the appropriate ignition diagram for the actual installation and verify the hardware version.

Wire or connectionManufacturer-described function
Large redBattery supply
WhiteSwitched ignition-on and cranking supply
Large orangeFuel pump positive supply
BlueEngine speed input when timing control is not used
BlackCoil trigger when timing control is used
YellowFan 1 relay control
Yellow/black leadCoolant temperature sensor; separate lead from throttle body
Violet / green pairMagnetic pickup positive / negative when using timing control
Oxygen-sensor cableWideband oxygen-sensor harness

Power-adder option harness

The same manual lists an optional four-wire power-adder harness. These are wire functions, not numbered cavity assignments.

WireFunction
Thin redAir-conditioning input
BlackFan 2 relay control
WhiteNitrous arming input
TanNitrous relay control
Revision 1: FiTech 30065 Go EFI 2×4 1200 HP Bright Aluminum EFI Power Adder

FiTech 30065 Go EFI 2×4 1200 HP Bright Aluminum EFI Power Adder is a self-learning dual-quad throttle-body fuel-injection system. This kit uses two four-barrel throttle bodies and a compatible dual-quad manifold. FiTech describes one throttle body as the control unit and the other as carrying additional injectors on the 625 and 1200 hp Go EFI 2×4 kits; confirm the arrangement against the exact kit instructions.

FiTech 30065 throttle-body EFI
FiTech’s product image for 30065; kit contents and finish should be checked against the exact part number. Source: FiTech product listing; reproduced with permission.

Identification and fitment

Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The manifold needs two compatible four-barrel mounting locations. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30065 specifications.

ItemManufacturer listing
FiTech model30065
Manufacturer maximum power1200 HP
Mounting flangeDual 4-barrel square bore
ECU includedYes
Throttle-body finishPolished
Fuel pump included in listed base kitNo
Timing control, manufacturer listingYes
Power-adder compatible, manufacturer listingYes

Control and installation

FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.

Customer harness wire reference

FiTech’s Go EFI installation instructions, revision 18 June 2024, include this model and show Harness A and the four-plus-two customer connector on pages 5–6. This is a wire-colour reference; the source does not assign numbered connector cavities. Follow the appropriate ignition diagram for the actual installation and verify the hardware version.

Wire or connectionManufacturer-described function
Large redBattery supply
WhiteSwitched ignition-on and cranking supply
Large orangeFuel pump positive supply
BlueEngine speed input when timing control is not used
BlackCoil trigger when timing control is used
YellowFan 1 relay control
Yellow/black leadCoolant temperature sensor; separate lead from throttle body
Violet / green pairMagnetic pickup positive / negative when using timing control
Oxygen-sensor cableWideband oxygen-sensor harness

Power-adder option harness

The same manual lists an optional four-wire power-adder harness. These are wire functions, not numbered cavity assignments.

WireFunction
Thin redAir-conditioning input
BlackFan 2 relay control
WhiteNitrous arming input
TanNitrous relay control