FiTech 30065 Go EFI 2×4 1200 HP Bright Aluminum EFI Power Adder is a self-learning dual-quad throttle-body fuel-injection system. This kit uses two four-barrel throttle bodies and a compatible dual-quad manifold. FiTech describes one throttle body as the control unit and the other as carrying additional injectors on the 625 and 1200 hp Go EFI 2×4 kits; confirm the arrangement against the exact kit instructions.

Identification and fitment
Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The manifold needs two compatible four-barrel mounting locations. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30065 specifications.
| Item | Manufacturer listing |
|---|---|
| FiTech model | 30065 |
| Manufacturer maximum power | 1200 HP |
| Mounting flange | Dual 4-barrel square bore |
| ECU included | Yes |
| Throttle-body finish | Polished |
| Fuel pump included in listed base kit | No |
| Timing control, manufacturer listing | Yes |
| Power-adder compatible, manufacturer listing | Yes |
Control and installation
FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.
Customer harness wire reference
FiTech’s Go EFI installation instructions, revision 18 June 2024, include this model and show Harness A and the four-plus-two customer connector on pages 5–6. This is a wire-colour reference; the source does not assign numbered connector cavities. Follow the appropriate ignition diagram for the actual installation and verify the hardware version.
| Wire or connection | Manufacturer-described function |
|---|---|
| Large red | Battery supply |
| White | Switched ignition-on and cranking supply |
| Large orange | Fuel pump positive supply |
| Blue | Engine speed input when timing control is not used |
| Black | Coil trigger when timing control is used |
| Yellow | Fan 1 relay control |
| Yellow/black lead | Coolant temperature sensor; separate lead from throttle body |
| Violet / green pair | Magnetic pickup positive / negative when using timing control |
| Oxygen-sensor cable | Wideband oxygen-sensor harness |
Power-adder option harness
The same manual lists an optional four-wire power-adder harness. These are wire functions, not numbered cavity assignments.
| Wire | Function |
|---|---|
| Thin red | Air-conditioning input |
| Black | Fan 2 relay control |
| White | Nitrous arming input |
| Tan | Nitrous relay control |