Removed text is struck through; added text is highlighted.
FiTech 30013 Go EFI 8 1200 HP Bright Aluminum Finish System is a self-learning carburettor-replacement throttle-body fuel-injection system. FiTech identifies this as a square-bore, four-barrel replacement system with an electronic controller, injectors and fuel pressure regulation. The handheld controller is a setup and display device; confirm actual components supplied in the specific kit.
FiTech’s product image for 30013; kit contents and finish should be checked against the exact part number. Source: FiTech product listing; reproduced with permission.
Identification and fitment
Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The flange is specified as a four-barrel square bore; some spread-bore manifolds need an adaptor. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30013 specifications.
ItemManufacturer listingFiTech model30013Manufacturer maximum power1200 HPMounting flange4-barrel square boreECU includedYesThrottle-body finishPolishedFuel pump included in listed base kitNoTiming control, manufacturer listingYesPower-adder compatible, manufacturer listingYes
Control and installation
FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.
Customer harness wire reference
FiTech’s Go EFI installation instructions, revision 18 June 2024, include this model and show Harness A and the four-plus-two customer connector on pages 5–6. This is a wire-colour reference; the source does not assign numbered connector cavities. Follow the appropriate ignition diagram for the actual installation and verify the hardware version.
Wire or connectionManufacturer-described functionLarge redBattery supplyWhiteSwitched ignition-on and cranking supplyLarge orangeFuel pump positive supplyBlueEngine speed input when timing control is not usedBlackCoil trigger when timing control is usedYellowFan 1 relay controlYellow/black leadCoolant temperature sensor; separate lead from throttle bodyViolet / green pairMagnetic pickup positive / negative when using timing controlOxygen-sensor cableWideband oxygen-sensor harness
Power-adder option harness
The same manual lists an optional four-wire power-adder harness. These are wire functions, not numbered cavity assignments.
WireFunctionThin redAir-conditioning inputBlackFan 2 relay controlWhiteNitrous arming inputTanNitrous relay control
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: FiTech 30013 Go EFI 8 1200 HP Bright Aluminum Finish System
FiTech 30013 Go EFI 8 1200 HP Bright Aluminum Finish System is a self-learning carburettor-replacement throttle-body fuel-injection system. FiTech identifies this as a square-bore, four-barrel replacement system with an electronic controller, injectors and fuel pressure regulation. The handheld controller is a setup and display device; confirm actual components supplied in the specific kit.
FiTech’s product image for 30013; kit contents and finish should be checked against the exact part number. Source: FiTech product listing; reproduced with permission.
Identification and fitment
Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The flange is specified as a four-barrel square bore; some spread-bore manifolds need an adaptor. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30013 specifications.
Item
Manufacturer listing
FiTech model
30013
Manufacturer maximum power
1200 HP
Mounting flange
4-barrel square bore
ECU included
Yes
Throttle-body finish
Polished
Fuel pump included in listed base kit
No
Timing control, manufacturer listing
Yes
Power-adder compatible, manufacturer listing
Yes
Control and installation
FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.
Customer harness wire reference
FiTech’s Go EFI installation instructions, revision 18 June 2024, include this model and show Harness A and the four-plus-two customer connector on pages 5–6. This is a wire-colour reference; the source does not assign numbered connector cavities. Follow the appropriate ignition diagram for the actual installation and verify the hardware version.
Wire or connection
Manufacturer-described function
Large red
Battery supply
White
Switched ignition-on and cranking supply
Large orange
Fuel pump positive supply
Blue
Engine speed input when timing control is not used
Black
Coil trigger when timing control is used
Yellow
Fan 1 relay control
Yellow/black lead
Coolant temperature sensor; separate lead from throttle body
Violet / green pair
Magnetic pickup positive / negative when using timing control
Oxygen-sensor cable
Wideband oxygen-sensor harness
Power-adder option harness
The same manual lists an optional four-wire power-adder harness. These are wire functions, not numbered cavity assignments.
Wire
Function
Thin red
Air-conditioning input
Black
Fan 2 relay control
White
Nitrous arming input
Tan
Nitrous relay control
Revision 1: FiTech 30013 Go EFI 8 1200 HP Bright Aluminum Finish System
FiTech 30013 Go EFI 8 1200 HP Bright Aluminum Finish System is a self-learning carburettor-replacement throttle-body fuel-injection system. FiTech identifies this as a square-bore, four-barrel replacement system with an electronic controller, injectors and fuel pressure regulation. The handheld controller is a setup and display device; confirm actual components supplied in the specific kit.
FiTech’s product image for 30013; kit contents and finish should be checked against the exact part number. Source: FiTech product listing; reproduced with permission.
Identification and fitment
Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The flange is specified as a four-barrel square bore; some spread-bore manifolds need an adaptor. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30013 specifications.
Item
Manufacturer listing
FiTech model
30013
Manufacturer maximum power
1200 HP
Mounting flange
4-barrel square bore
ECU included
Yes
Throttle-body finish
Polished
Fuel pump included in listed base kit
No
Timing control, manufacturer listing
Yes
Power-adder compatible, manufacturer listing
Yes
Control and installation
FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.
Customer harness wire reference
FiTech’s Go EFI installation instructions, revision 18 June 2024, include this model and show Harness A and the four-plus-two customer connector on pages 5–6. This is a wire-colour reference; the source does not assign numbered connector cavities. Follow the appropriate ignition diagram for the actual installation and verify the hardware version.
Wire or connection
Manufacturer-described function
Large red
Battery supply
White
Switched ignition-on and cranking supply
Large orange
Fuel pump positive supply
Blue
Engine speed input when timing control is not used
Black
Coil trigger when timing control is used
Yellow
Fan 1 relay control
Yellow/black lead
Coolant temperature sensor; separate lead from throttle body
Violet / green pair
Magnetic pickup positive / negative when using timing control
Oxygen-sensor cable
Wideband oxygen-sensor harness
Power-adder option harness
The same manual lists an optional four-wire power-adder harness. These are wire functions, not numbered cavity assignments.