Tuning Wiki
Applies to

Check the hardware and software limits stated in this article.

FiTech 30013 Go EFI 8 1200 HP Bright Aluminum Finish System is a self-learning carburettor-replacement throttle-body fuel-injection system. FiTech identifies this as a square-bore, four-barrel replacement system with an electronic controller, injectors and fuel pressure regulation. The handheld controller is a setup and display device; confirm actual components supplied in the specific kit.

FiTech 30013 throttle-body EFI
FiTech’s product image for 30013; kit contents and finish should be checked against the exact part number. Source: FiTech product listing; reproduced with permission.

Identification and fitment

Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The flange is specified as a four-barrel square bore; some spread-bore manifolds need an adaptor. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30013 specifications.

ItemManufacturer listing
FiTech model30013
Manufacturer maximum power1200 HP
Mounting flange4-barrel square bore
ECU includedYes
Throttle-body finishPolished
Fuel pump included in listed base kitNo
Timing control, manufacturer listingYes
Power-adder compatible, manufacturer listingYes

Control and installation

FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.

Customer harness wire reference

FiTech’s Go EFI installation instructions, revision 18 June 2024, include this model and show Harness A and the four-plus-two customer connector on pages 5–6. This is a wire-colour reference; the source does not assign numbered connector cavities. Follow the appropriate ignition diagram for the actual installation and verify the hardware version.

Wire or connectionManufacturer-described function
Large redBattery supply
WhiteSwitched ignition-on and cranking supply
Large orangeFuel pump positive supply
BlueEngine speed input when timing control is not used
BlackCoil trigger when timing control is used
YellowFan 1 relay control
Yellow/black leadCoolant temperature sensor; separate lead from throttle body
Violet / green pairMagnetic pickup positive / negative when using timing control
Oxygen-sensor cableWideband oxygen-sensor harness

Power-adder option harness

The same manual lists an optional four-wire power-adder harness. These are wire functions, not numbered cavity assignments.

WireFunction
Thin redAir-conditioning input
BlackFan 2 relay control
WhiteNitrous arming input
TanNitrous relay control