Dyna Pro Dynamometers is a UK manufacturer of dynamometer systems, particularly associated with motorcycles, karts and other powersports test applications.

History
Dyna Pro's company biography traces development by Suzy Dent from early engine-test equipment to commercial dynamometer design in 2003. It says the Dyna Pro name was established under JD Engineering in 2004, eddy-brake machines followed in 2006, the operation moved to Basingstoke in 2008, and Dyna Pro Dynamometers Limited was formed in 2009. The company describes subsequent car-dyno development as well.
Selected dynos
- S68 and S125: inertia-only motorcycle chassis models listed alongside their load-controlled counterparts.
- S68-LC, S125-LC and S125-LCE: listed eddy-brake motorcycle models. S125-LC product information describes a load-controlled system; ratings and features vary by option and generation.
- T62, T62-LC and T62-LCC: motorcycle, kart and ATV family entries listed in the manufacturer's technical index; LC denotes a listed eddy-brake configuration.
The tyre drives a roller. Inertia-only equipment infers output from acceleration; a fitted and controlled eddy brake adds a load-holding capability within its envelope. Compare individual data sheets rather than assuming all S or T systems have identical brakes or instrumentation.
Controllers and software
Dyna Run and Dyna View are the company's test and graphing software; its site references Dyna Run V3 and V4. The V3 user manual illustrates real-time displays, auxiliary channels and eddy-brake controls and notes features depend on model. Confirm the installed control hardware, licence and current software support before purchasing or rebuilding a used machine.
Part of Dynamometers and the manufacturers and suppliers directory. The products below are selected examples, not a complete catalogue; specifications, software and availability vary with generation and configuration.
How the Dyna Pro control system works
On a load-controlled Dyna Pro installation the vehicle turns the roller while speed and torque measurements feed the test system. The operator selects a test or target in Dyna Run, and suitable electronic hardware controls the eddy brake to vary the resisting load. In an inertia-only installation the roller's acceleration is used for the run; it has no eddy-brake load holding unless the appropriate mechanical brake and control hardware are added. See the S125-LC product specification and the Dyna Pro upgrades page.
Models, inputs and control options
The S125-LC listing specifies an eddy brake with torque monitoring, closed-loop control and infrared temperature compensation, digital speed sensing, a USB link, hand controller, ignition pickup, calibration arm and check weight. It describes dynamic load control as self-learning with no user PID adjustment on that model. It lists twelve auxiliary 0–5 V acquisition inputs; confirm the fitted version and compatible sensor electronics before connecting equipment. The listed air brake is separate from the eddy-current load absorber.
Optional accessories on the same model page include cooling fans, single/dual/quad air–fuel equipment, a climate monitor, a four-channel K-type thermocouple unit and a road-speed-related RAM-air system. Some are included in a named show package and optional in other configurations. The accessories list also describes the remote pendant's fan operation and the climate module's temperature, pressure, humidity and relative-air-density display.
The manufacturer's technical index distinguishes S68, S125 and T62 inertia-only models from their LC/LCE/LCC eddy-braked variants. Model and generation determine the available sensors, brake and control features. The S125-LC specification identifies sweep, step, static and constant-load tests and continued inertia acceleration tests within the equipment's limits; it does not establish that every older Dyna Pro system has the same functions.
Dyna Run and Dyna View software
The software page identifies Dyna Run V4 for Windows 10/11 and Dyna View for viewing graphs. It illustrates live displays, wind-drag setup, linear or user-defined static tests and RAM-air setup. Actual availability depends on the dyno, brake, sensors and supplied options. A suitable controlled brake is required for static load holding; software alone cannot add one.

Published pages mention both V3 and V4: the V3 manual documents an earlier interface and warns that functions vary by model, while the current product page identifies V4. Dyna Pro's published terms describe a time-limited V4 full-version entitlement for factory-new purchases and a standard free version thereafter. Confirm the installed software, current licence, update entitlement and compatible PC with the company; older published specifications may describe different terms.
Retrofitting an eddy brake
Dyna Pro lists the DP-EBU eddy-brake upgrade for its S68, S125 and T62 inertia-only dynos. The manufacturer says the physical brake upgrade adds closed-loop load-controlled testing while retaining inertia tests. This is an upgrade to named Dyna Pro machines; the source does not establish it as a universal controller conversion for other makes. Ask the supplier for the exact installation, brake power hardware, sensor, calibration and commissioning scope before ordering. Dyna Pro upgrade details.
For a used or upgraded system, identify its roller and brake model, control unit, software and licence, speed/torque sensors, climate and auxiliary modules, cooling, power-supply and emergency-brake arrangement. Verify calibration and test function using the relevant Dyna Pro documentation. See dynamometer control systems and factory and aftermarket controller comparison.