Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
ThunderMax standalone motorcycle ECUs
Applies to
ThunderMax standalone motorcycle ECUs
Tool groups
None
Manufacturers
None

ThunderMax 309-362 is a vehicle-specific standalone replacement engine-management kit for fuel-injected Harley-Davidson motorcycles. It replaces the original ECM and connects to the specified vehicle harness; it is not simply a piggyback fuel controller. ThunderMax model documentation.

Manufacturer illustration of the ThunderMax 309-362 kit
Manufacturer illustration of the ThunderMax 309-362 kit. Image: ThunderMax manufacturer product listing, reproduced with permission.

Application and identification

2008–2013 Harley-Davidson Touring and 2009–2013 Trike models with throttle-by-wire. Manufacturer source.

Check the part number, model year, throttle arrangement, vehicle equipment and the manufacturer’s current installation guide. Kit contents and engine compatibility must not be inferred from the common ThunderMax brand or another part number.

Control and installation

ThunderMax describes its replacement systems as using wideband oxygen-sensor feedback and AutoTune. Sensors, adapters, software, basemap and calibration depend on the kit and vehicle. Manufacturer system overview; installation and support documents.

Connector information

This application uses the relevant factory-style vehicle connection and the kit’s associated sensor harness. A complete pin-by-pin schedule for this exact part number has not been verified here; consult the matching installation instructions and identify the connector and harness before wiring. Do not transfer a pinout from another Harley-Davidson model or ThunderMax kit.