Hydra-Test supplies test equipment for transmission and valve-body work and a modular HTC-S data-acquisition and control platform that can be configured for other test stands. Its HT-DCC Deluxe package applies the controller and software to compatible transmission dynamometers. The actual equipment, sensors, brake drives and software depend on the installation. Hydra-Test DAQ and control.

Company background
Hydra-Test's company history describes transmission-service work since the 1990s and dates the HTC-S controller design to 2016. The company describes a modular, expandable controller architecture for its own products and selected third-party test systems. This is the supplier's published chronology.
HTC-S modular acquisition and control
The manufacturer's HTC-S page describes a configurable data-acquisition and control system with up to 144 inputs and 52 outputs when suitably expanded. Input types listed include 0–10 V, 4–20 mA, temperature, speed and switches. Output types include PWM, analogue and discrete signals. The maxima describe an expanded system, not the number supplied in every controller.
The system communicates with a PC using Ethernet and supports configurable data display and control. Hydra-Test lists PID and other control methods, and CANopen/J1939 device interfaces where configured. The supplier also describes custom expansion and installation into an existing cabinet or a separate case. Ask which channels, modules, licences and sensors are in the specific system.
HT-DCC Deluxe transmission dyno controls
HT-DCC Deluxe is a cart-based transmission dyno and solenoid-control package described for Axi-line or Mustang transmission dynamometers. The product page identifies HTC-S+ hardware, Hydra-Test software, manual and automatic tests and editable transmission test scripts. The listed package includes isolated analogue dyno-control outputs, solenoid drivers and speed, torque, pressure and temperature measurement provisions. Do not assume the complete input list applies to every HTC-S installation.
Hydra-Test lists available Axi-line and Zoom test-cable adapters and commissioning services for the described transmission application. This is evidence of the supplier's intended use, not a guarantee of direct compatibility with every dyno from either make. A compatible mechanical adapter is not itself proof that brake wiring, controller functions and sensor calibration will match.
Engine, chassis and other test stands
The supplier says HTC-S-based systems can be adapted to transmission stands, chassis dynos, engine loading stands, electric-motor stands and valve-body equipment. Brake type, control strategy, load-cell interface, drive electronics and interlocks must be engineered for the particular project; the product page does not establish that a standard HTC-S is a plug-in controller for a specific rolling road, hydraulic hub system or aftermarket eddy brake. Applications and I/O information.
Before retrofitting, identify the existing speed, torque and pressure sensors and whether the machine uses a valve, electromagnetic field supply or electric drive. Confirm required channels, interfaces, emergency-stop chain, included hardware, test scripts and support, and calibrate the assembled system according to the suppliers' instructions. Related: Dynamometer control systems · Factory and aftermarket comparison.