6dm Ltd supplies dynamometer and engine-test control equipment, including its REO-dEC R2 controller and REO-dCA R2 data-acquisition system. The company describes new installations and updates to existing engine test beds. The controller, absorber, brake power electronics, sensors, actuators and software must be selected as a complete system. 6dm control-system information.

Background and scope
The supplier's REO-dEC R2 overview says the product develops the original REO systems designed by KLaS Real Time Systems. It is intended for professional engine and dynamometer test facilities, not established as a universal plug-in replacement for every chassis or hub dyno. Verify the exact machine, installation and support with 6dm.
REO-dEC R2 controller
The REO-dEC R2 is a rack-mount controller with a 12-inch touch screen and digital PID control. The manufacturer describes stable speed and torque modes, configurable PID and system settings, analogue and digital I/O, networking and recording. It supports an engine throttle or pedal actuator when the relevant control hardware is specified. The displayed values and protection functions depend on the configured test bed. Product brochure.
The brochure describes one or two dynamometers in tandem. For water brakes it lists inlet and outlet valve control for up to two dynos. The published rear-panel list includes 12 analogue inputs, eight thermocouple inputs, two conditioned load-cell inputs, two frequency inputs, six digital inputs, six analogue outputs and eight digital outputs. These are controller connections, not a claim that all sensors, brake power modules, valves or actuators are included. Interface details, configuration and compatibility must be checked against the supplied unit.
REO-dCA R2 test-bed system
REO-dCA R2 builds on REO-dEC R2 to provide a larger test-bed control and acquisition package. The supplier's system description lists REO-dCA software, a remote PC and display, keyboard and mouse, connecting cables and an REO-TXB transducer box in a typical system. It lists automotive, marine and industrial engine testing and existing facility upgrades as applications. Check the actual quotation rather than assuming every option is standard.
The optional measurement-expansion transducer box is described with eight K/J thermocouple inputs, four pressure-transducer inputs, two ±10 V inputs and integrated barometric-pressure and humidity sensing. It allows more test channels to be recorded; its presence and configured sensor types are installation-specific.
Compatible brakes and integration
The brochure lists single or tandem water brakes, single or tandem eddy-current dynamometers, AC and DC dynamometers, and mechanical or electronic throttle/pedal control. 6dm's product page lists optional output modules for hydraulic, eddy-current and AC applications. A compatible actuator, field supply or inverter and suitable electrical protection are required for the selected machine; the same control signal cannot simply drive every absorber.
The controller can use feedback to hold speed or torque where the engine, sensors and absorber permit the requested point. An AC/DC control interface does not by itself prove a specific installation can motor the engine or regenerate power. Ask the supplier to confirm brake model, shaft and load-cell channels, valve or coil ratings, throttle actuation, test modes, interlocks, installation and commissioning. See dyno control systems and controller comparison.