Page organisation in this revision
- Page type
- Reference hub
- Subject
- ABS / DSC
- Parent
- Nemesis TCS motorcycle traction control systems
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Ducati, Nemesis
Changes from revision 1 to revision 1
Removed text is struck through; added text is highlighted.
The Nemesis-TCS kit TCS-848.1098.AB is documented by Bike Sport Developments for Ducati 848 or 1098 with standard seat unit and the TCS installed in the toolbox. It is an aftermarket track system, not factory Ducati traction control. It uses a front speed pickup and ignition-coil intervention with a dedicated loom. The manual does not state model years, so do not extend fitment by year without the supplier. 848/1098 AB installation manual, revision 04, 31 August 2011.
Harness identification
The manufacturer’s manual identifies TC module connector 1 as the six-way coil loom CSW1285, connector 2 as the eight-way input loom CSW1278, and connector 3 as the four-way CAN/power loom CSW1286. These refer to connector assemblies, not cavity functions. The manual warns that the three controller connectors must only use the supplied blue-banded looms, even when a motorcycle loom connector physically fits. Use the exact kit and installation manual.
Do not assume the separate AiM-documented four-way data connector is controller connector 3: the sources describe different connector locations and do not establish interchangeability.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Nemesis TCS Ducati 848 and 1098 AB kit
The Nemesis-TCS kit TCS-848.1098.AB is documented by Bike Sport Developments for Ducati 848 or 1098 with standard seat unit and the TCS installed in the toolbox. It is an aftermarket track system, not factory Ducati traction control. It uses a front speed pickup and ignition-coil intervention with a dedicated loom. The manual does not state model years, so do not extend fitment by year without the supplier. 848/1098 AB installation manual, revision 04, 31 August 2011.
Harness identification
The manufacturer’s manual identifies TC module connector 1 as the six-way coil loom CSW1285, connector 2 as the eight-way input loom CSW1278, and connector 3 as the four-way CAN/power loom CSW1286. These refer to connector assemblies, not cavity functions. The manual warns that the three controller connectors must only use the supplied blue-banded looms, even when a motorcycle loom connector physically fits. Use the exact kit and installation manual.
Do not assume the separate AiM-documented four-way data connector is controller connector 3: the sources describe different connector locations and do not establish interchangeability.
Revision 1: Nemesis TCS Ducati 848 and 1098 AB kit
The Nemesis-TCS kit TCS-848.1098.AB is documented by Bike Sport Developments for Ducati 848 or 1098 with standard seat unit and the TCS installed in the toolbox. It is an aftermarket track system, not factory Ducati traction control. It uses a front speed pickup and ignition-coil intervention with a dedicated loom. The manual does not state model years, so do not extend fitment by year without the supplier. 848/1098 AB installation manual, revision 04, 31 August 2011.
Harness identification
The manufacturer’s manual identifies TC module connector 1 as the six-way coil loom CSW1285, connector 2 as the eight-way input loom CSW1278, and connector 3 as the four-way CAN/power loom CSW1286. These refer to connector assemblies, not cavity functions. The manual warns that the three controller connectors must only use the supplied blue-banded looms, even when a motorcycle loom connector physically fits. Use the exact kit and installation manual.
Do not assume the separate AiM-documented four-way data connector is controller connector 3: the sources describe different connector locations and do not establish interchangeability.