Tuning Wiki
Browse Nemesis

This is the separate four-way Superseal data connector on the Nemesis TCS kit harness illustrated by AiM Infotech, release 1.03. It is a data-logging integration reference, not a pinout for the traction ECU’s own plugs or every Nemesis vehicle harness. Identify the actual connector and orientation using the cited diagram.

Superseal pinAiM function
112 V
2CAN +
3CAN −
4Ground

AiM’s diagram uses graphic colours that do not match its table’s Nemesis wire-colour column; use the labelled pin functions and physically identify the supplied connector instead of relying on the diagram’s graphic colours. The document also gives logger-specific termination instructions. Verify the actual harness before connecting power or communications. AiM Infotech Nemesis TCS kit, release 1.03, wiring page.