Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Datalogging and telematics
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Race Technology

Changes from revision 1 to revision 2

Removed text is struck through; added text is highlighted.

Configurable in-car display with sensor and ECU interfaces. Internal data logging and GPS are optional, and must be fitted or enabled on the individual unit.

Image: Race Technology, reproduced with permission; manufacturer source.

Specifications and capabilities

The manufacturer lists four analogue inputs as standard with additional inputs as an option, plus RPM and speed inputs. Logging and lap timing require the relevant options. Manufacturer specifications and documentation.

Data analysis softwareWhere the internal logging option is enabled, use the unit’s USB/Device Explorer workflow to retrieve the run for analysis; a unit without that option requires a compatible external logger to record. Confirm the fitted options. Manufacturer documentation.Race Technology Analysis example; the available channels and video depend on the recording and enabled options. Image: Race Technology, reproduced with permission; manufacturer source.Download Race Technology software for Windows. Check the current version and any licence or hardware requirements; some advanced functions require a unit-linked licence. See the Race Technology software overview for features and licensing.

Pinouts and cabling

Selected connector positions from the manufacturer's installation guide. Connector A, 24-way: 14 CAN 1 low, 20 CAN 1 high, 19 CAN 2 low, 22 CAN 2 high. Connector B, 19-way: D/4 power, E/5 ground, F/6 high RPM, G/7 high RPM ground, P/15 low RPM, T/18 speed. Confirm full assignments, face orientation and fitted options from the guide.

Manufacturer connection reference.

Check the connector number, version and options on the actual unit against the manufacturer's documentation before wiring. Disconnect power before changing connections.

Wiring overview

Functional wiring overview; not a connector-face diagram. Confirm actual connections with the manufacturer.

Return to the Race Technology manufacturer page.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Race Technology DASH2 PRO

Configurable in-car display with sensor and ECU interfaces. Internal data logging and GPS are optional, and must be fitted or enabled on the individual unit.

Race Technology DASH2 PRO
Image: Race Technology, reproduced with permission; manufacturer source.

Specifications and capabilities

The manufacturer lists four analogue inputs as standard with additional inputs as an option, plus RPM and speed inputs. Logging and lap timing require the relevant options. Manufacturer specifications and documentation.

Pinouts and cabling

Selected connector positions from the manufacturer's installation guide. Connector A, 24-way: 14 CAN 1 low, 20 CAN 1 high, 19 CAN 2 low, 22 CAN 2 high. Connector B, 19-way: D/4 power, E/5 ground, F/6 high RPM, G/7 high RPM ground, P/15 low RPM, T/18 speed. Confirm full assignments, face orientation and fitted options from the guide.

Manufacturer connection reference.

Check the connector number, version and options on the actual unit against the manufacturer's documentation before wiring. Disconnect power before changing connections.

Wiring overview

Race Technology DASH2 PRO functional wiring overview
Functional wiring overview; not a connector-face diagram. Confirm actual connections with the manufacturer.

Return to the Race Technology manufacturer page.

Revision 2: Race Technology DASH2 PRO

Configurable in-car display with sensor and ECU interfaces. Internal data logging and GPS are optional, and must be fitted or enabled on the individual unit.

Race Technology DASH2 PRO
Image: Race Technology, reproduced with permission; manufacturer source.

Specifications and capabilities

The manufacturer lists four analogue inputs as standard with additional inputs as an option, plus RPM and speed inputs. Logging and lap timing require the relevant options. Manufacturer specifications and documentation.

Data analysis software

Where the internal logging option is enabled, use the unit’s USB/Device Explorer workflow to retrieve the run for analysis; a unit without that option requires a compatible external logger to record. Confirm the fitted options. Manufacturer documentation.

Race Technology Analysis showing graphs, lap times, video and a track map
Race Technology Analysis example; the available channels and video depend on the recording and enabled options. Image: Race Technology, reproduced with permission; manufacturer source.

Download Race Technology software for Windows. Check the current version and any licence or hardware requirements; some advanced functions require a unit-linked licence. See the Race Technology software overview for features and licensing.

Pinouts and cabling

Selected connector positions from the manufacturer's installation guide. Connector A, 24-way: 14 CAN 1 low, 20 CAN 1 high, 19 CAN 2 low, 22 CAN 2 high. Connector B, 19-way: D/4 power, E/5 ground, F/6 high RPM, G/7 high RPM ground, P/15 low RPM, T/18 speed. Confirm full assignments, face orientation and fitted options from the guide.

Manufacturer connection reference.

Check the connector number, version and options on the actual unit against the manufacturer's documentation before wiring. Disconnect power before changing connections.

Wiring overview

Race Technology DASH2 PRO functional wiring overview
Functional wiring overview; not a connector-face diagram. Confirm actual connections with the manufacturer.

Return to the Race Technology manufacturer page.