Standalone logger with GPS and inertial sensing, SD storage, analogue and frequency inputs, serial and CAN FD interfaces. GPS output is listed as 5 Hz; higher-rate raw data and sample rates depend on configuration and options.

Specifications and capabilities
The manufacturer lists up to 12 analogue inputs, four frequency inputs, CAN FD and legacy CAN. Check optional channels and configured sampling rates on the purchased unit. Manufacturer specifications and documentation.
Pinouts and cabling
The terminal labels include A1–A8 analogue, ground, +12 V supply, low- and high-level RPM inputs and F1–F4 frequency inputs; A9–A12 depend on the option. The low-level RPM input must not be connected directly to an ignition coil. The full numbered data-port pinout has not been verified here.
Manufacturer connection reference.
Check the connector number, version and options on the actual unit against the manufacturer's documentation before wiring. Disconnect power before changing connections.
Wiring overview
Return to the Race Technology manufacturer page.